|
|
|
Replacement Pioneer RT-909 901 RT909 RT901 NEW pinch
rollers with FREE NEW main drive belt!
NOTICE: AS OF 1/29/09, PIONEER RT-901 / 909 PINCH ROLLERS ARE NO LONGER BEING
MANUFACTURED!!!
THE LIMITED SUPPLY WE HAVE, WILL BE ALL FOR NOS PARTS.
ON ORDERS PLACED AFTER 1/29/09, WE DO OFFER A "CORE UNIT" REFUND OF $20 WHEN YOU
SEND YOUR OLD ROLLERS BACK*.
Replacement OEM Pioneer RT-909 Reel-to-Reel tape deck Pinch Rollers:
These are OEM, fresh rollers with new rubber and new brass bushings
for your RT-909 / RT-901 Reel to Reel Deck. If yours have never been replaced or
are over 8-12 years old, it's time. If your pinch-rollers are causing mis-tracking,
slipping, excessive Wow & Flutter, are "gummy", cracked, glazed hard,
have rounded-off edges or disintegrating and your belt
has turned to "tar",
then here you go! Breathe
new life into your classic Pioneer RT-909 RT-901 tape recorder. These
are now discontinued from
Pioneer, so get them while you can. We currently have
only a
few back in stock to sell (the rest we're keeping for
our decks. Sorry they will not fit the RT-707. Only
the RT-909 & the RT-901)
|
Domestic US Customers |
|
International
Customers |
PRICE INCLUDES:A pair of replacement,
NEW OEM
Pioneer RT-909 Reel-to-Reel tape deck Pinch Rollers
SHIPPING
Free NEW Main Drive Belt
Your Price
$197.99
(includes shipping to any of the US states)
|
PRICE INCLUDES:A pair of replacement,
NEW OEM
Pioneer RT-909 Reel-to-Reel tape deck Pinch Rollers
SHIPPING
Free NEW Main Drive Belt
Your Price
$207.99
(includes Airmail shipping to any other worldwide location)
|
IF YOU PREFER TO PLACE YOUR ORDER BY PHONE,
PLEASE CALL US AT:
719-964-7205
*
Please send your old pinch rollers back to
Oak Tree Enterprises
ATTN: Core Returns
PO BOX 6182
Colorado Springs, CO. 80934 USA
Please include a note with all of your contact information used for the purchase
of the new rollers.
Once received, you will receive a $20 credit back on the
purchase of your new units. The condition of the rubber on your originals does
not matter. They simply must be original Pioneer RT-901 or RT-909 rollers.
*NOT INCLUDED IN ANY OTHER
COMBINED PARTS DISCOUNTS OR SALES
(sorry, we do not have, nor can give out any instructions or advice on the
actual repair procedures)
|
|
|
(click on above thumbnails to enlarge
photos)
REVOX
10.5" Black anodized
Aluminum Take-up Reel
for 1/4" tape
Beautiful condition.
$75. ea.
SOLD
|
(click on above thumbnails to
enlarge photos)
MAXELL
UD-180-35
10.5" Aluminum metal reels
High Bias
Reel to Reel 1/4" Tape
for sale
Pre-owned, HIGH Bias Reel to Reel tape. 1,100 meters (3600 ft.)
in length. Most with leaders intact. All
include individual box. Most have been used and will have recordings on
them (we can bulk erase them for additional charge below). You will need to come up with your own labels as even if they are
in the box, they likely aren't "sticky" anymore.
Used and likely recorded
$37.49 shipped*
or
We can also do a "Bulk erase" on your tapes for an additional
$1.00 ea.
Used and Erased 2-Packs of Maxell UD 180-35
$68.50 shipped
(while
supply lasts)*
SOLD OUT
* Packed and shipped via Ground
shipment to any of the lower 48 states. Other destinations can be
calculated.
|
(click on above thumbnails to
enlarge photos)
SONY
SLH
10.5" Aluminum metal reels
High Bias
Reel to Reel 1/4" Tape
for sale
Pre-owned, HIGH Bias Reel to Reel tape. 740 meters (2200 ft.) in
length. Most with leaders intact. All
include individual box. Most have been used and will have recordings on
them (we can bulk erase them for additional charge below). You will need to come up with your own labels as even if they are
in the box, they likely aren't "sticky" anymore.
Used and likely recorded
$32.49 each
Only 1-left in stock
including shipping
(while supply lasts)*
or
We can also do a "Bulk erase" on your tapes for an additional
$1.00 ea.
SOLD OUT
* Packed and shipped via Ground
shipment to any of the lower 48 states. Other destinations can be
calculated.
|
|
- |
|
(click on above thumbnails to enlarge photos)
NEW! FRESH RUBBER!
TEAC
REEL HUB / SPINDLE ADAPTORS / STOPPERS
For Open-reel tape decks. Designed to hold reels on the spindles of
decks that did not have built-in Reel locks. These will fit Teac, Akai,
Roberts, Rheem, Sony *, Ampex and other
reel-reel tape decks that have standard small reel spindles. Easy and
quick to take on and off. These are New Stock and made of new rubber.
Great to replace your old, dried out / cracked or lost ones.
$24.99. matched pairs
CURRENTLY OUT OF STOCK 6/26/07
* Still best to use Sony
decks in horizontal mode unless you have the original Sony Rubber stoppers
as they are slightly different. These TEAC stoppers will work with Sony's
when used in horizontal position.
|
SORRY, WE RECENTLY SOLD OUT OF ALL
NAB ADAPTORS WITH NO "LIGHT AT THE END OF THE TUNNEL" ON GETTING MORE
NEW.
PERIODICALLY A USED PAIR WILL COME IN, BUT THEY GET SNATCHED UP QUICK.
KEEP AN EYE ON THIS PAGE.
|
(click on above thumbnails to
enlarge photos)
NEW
TEAC / TASCAM
10.5" x 1/4" NAB
REEL HUB ADAPTORS HUBS
For 1/4" tape decks. Designed to allow decks capable of fitting 10
and 10.5" reels to accommodate them on the standard small reel
spindles. Easy and quick to take on and off. Usually in stock. These
will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other
reel-reel tape decks that have standard small reel spindles, but can
take 10.5" reels. Used and
brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.
CURRENTLY SOLD OUT OF USED |
(click on above thumbnails to
enlarge photos)
USED / VINTAGE
10.5" x 1/4" NAB
REEL HUB ADAPTORS HUBS
For 1/4" & 1/2" tape decks. Designed to allow decks capable of fitting 10
and 10.5" reels to accommodate them on the standard small reel
spindles. Easy and quick to take on and off. Usually in stock. These
will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other
reel-reel tape decks that have standard small reel spindles, but can
take 10.5" reels. Used and
brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.
SOLD
OUT
|
(click on above thumbnails to
enlarge photos)
NEW
TEAC / TASCAM
10.5" x 1/2" NAB
REEL HUB ADAPTORS HUBS
For 1/2" tape decks. Designed to allow decks capable of fitting 10
and 10.5" reels to accommodate them on the standard small reel
spindles. Easy and quick to take on and off. Usually in stock. These
will fit most Teac, Tascam, Akai, Pioneer, Technics, Sony, Ampex and other
reel-reel tape decks that have standard small reel spindles, but can
take 10.5" reels. Used and
brands available may vary and will likely vary from photo.
$89.99. matched pairs
$54.99 singles / each.
CURRENTLY SOLD OUT
|
(click on above thumbnails to enlarge
photos)
PIONEER PR-220 or 220A
1/4" NAB
REEL HUB ADAPTORS HUBS
Pioneer PR-220 NAB hub adaptors, for 1/4" tape
decks. Designed to allow decks capable of fitting 10 and 10.5" reels to
accommodate them on the standard small reel spindles. Easy and quick to
take on and off. May need optional shim behind it for
tightest fit.
$89.99. matched pairs
$54.99 singles / each
SOLD OUT CURRENTLY
SORRY, WE RECENTLY SOLD OUT OF ALL
BUT ONE NEW, 1/4" NAB ADAPTORS WITH NO "LIGHT AT THE END OF THE TUNNEL" ON GETTING MORE
NEW.
PERIODICALLY A USED PAIR WILL COME IN, BUT THEY GET SNATCHED UP QUICK.
KEEP AN EYE ON THIS PAGE.
|
|
| |
|
|
|
- |
CLICK ON A DEPARTMENT BELOW >
Wondering where
the "tone" you remember went?....
.... Surround yourself with Silver and find it again!
|
| SOLD
ITEMS BELOW: |
SOLD
ITEMS BELOW: |
SOLD ITEMS BELOW:
|
AMCO
MODEL PM2
SOLD |
Original
PIONEER RACK SHELF
Cond. 10
SOLD OUT
|
PIONEER
ORIGINAL RACK HANDLES
SOLD OUT
|
STAX
SR-40
Circa 80's
SOLD
|
PIONEER
ORIGINAL RACK HANDLES
SOLD OUT
|
Original
PIONEER RACK SHELF
Cond. 10
SOLD OUT
|
PIONEER
PR-101
10" aluminum reels for 1/4" tape. These utilize hub
adaptors or reel inserts (not included). They are in great shape. No
dents or scratches. If you have a Pioneer RT-707, 909 or other Pioneer
deck that can fit 10" reels then you should have at least one
official Metal Pioneer Take-Up reel.
Cond. 10
SOLD OUT
|
(click on above photos to enlarge)
 warranty
NEW
AUDIO-TECHNICA
ATH-M30
SOLD OUT
|
-
AKAI
ATR-10
10" METAL REELS
For 1/4" tape and use with hubs.
NOS still in box!
Cond. 10
Very limited quantity!!!
$55. ea
SOLD OUT
|
(Click on above photos to enlarge)
PIONEER
7-inch Metal Take-up Reel
Reels
PR-85
7" aluminum reel for 1/4" tape. These are in great shape. No
dents or scratches. If you have a Pioneer RT-707, 909 or other Pioneer
deck then you should have at least one
official Metal Pioneer Take-Up reel.
Cond. 10
$65. 1 just in
SOLD 3/15/04
|
warranty
KENWOOD
KH-71
SOLD
Vintage Stereo Headphones
Classic "Buckskin" Leather Kenwood KH-71 Stereo Headphones in great condition.
Ear cup external covering is real leather. Headband covering is matching
finish vinyl. Fully adjustable. 12' black cloth cord also perfect.
Normal wear to ear cup padding finish. Work and
sound GREAT! Includes our standard 90 day limited warranty.
Cond. 8
SOLD
|
(Click on above photos to enlarge)
MARANTZ
SQA-2 SQA2
SQ FOUR CHANNEL ADAPTOR / QUAD QUADRAPHONIC DECODER
If you have a 4 channel Marantz receiver or Int Amp you need this to use
it in true 4 channel mode. Comes with the 4-original mounting bolts.
SOLD
|
(click on above photos to enlarge)
ORTOFON
T-20
STEP UP TRANSFORMER / HEAD AMP FOR MOVING COIL CARTRIDGES
Very handy Ortofon T-20 "Head Amp" to allow your moving coil
cartridge to function with pre-amps having only a standard magnetic
cartridge phono input. Passive operation. Looks new.
Cond. 9.5
SOLD
|
(click on above photos to enlarge)
AKAI
RC-20
SOLD 12/9/03
Tape Deck Remote. Check your owners manual for compatibility (definitely
works with X-330D). Tested and works great. 16' long heavy duty cable in
great condition with no nicks or cuts. This remote is in like new
condition!
1 only.
Cond. 10
SOLD 12/9/03
|
(click on above photos to enlarge)
AKAI
RC-16
SOLD 12/9/03
Tape Deck Remote. Check your owners manual for compatibility. 16'
cable and 11-pin connector. NOS still in original
box!
1 only!
Cond. 10
SOLD 12/9/03
|
| - |
-
|
-
|
Please see / read the
"red" paragraphs above prior to hitting this email link or
calling)
