PHOTO GALLERY OF VINTAGE / USED
TECHNICS STEREO TURNTABLES
- REFERENCE PHOTOS / ARCHIVE SOLD UNITS -
 

 

Archive / Reference / Photo Gallery of Vintage Technics Stereo Turntables that we have had in the past. Vintage 1970's and 80's models of Technics Turntable models such as, Technics SL-5, SL-20, SL-23, SL-220, SL-230, SL-235, SL-1400, SL-1500, SL-1600MK2, SL-1950 Stacker / Changer, SL-3300, SL-3350 Stacker / Changer, SL-B2, SL-B5 Stacker / Changer, SL-B35, S;-B101, SL-B200, SL-B202, SL-B210, SL-B300, SL-B350, SL-B500, SL-BD35, SL-D2, SL-D3, SL-D22, SL-D202, SL-D303, SL-DL1, SL-DL5, SL-J2, SL-Q2, SL-Q3, SL-Q5, SL-Q30, SL-Q202, SL-Q300, SL-QD33, SL-QL5, SL-QX300. Keep checking this page and our 'current turntables' page as we commonly have more Technics Turntables coming. All photos and text, copyrighted and protected as stated at bottom of page. Click the link below for current inventory.

 

This page is for photo / text ARCHIVING ONLY of our Restored / Refurbished used Technics stereo turntables that have already been SOLD. Click the link below for current inventory.

... OR, CLICK HERE TO SEE OUR TURNTABLES CURRENTLY FOR SALE!

Technics_SL5_web.jpg (16669 bytes)  

Technics_SL5_collage.jpg (114142 bytes)

VINTAGE TECHNICS LINEAR TRACKING TURNTABLE
TECHNICS SL5
HOLD FOR SHOP USE


 




       NEW LISTING 4/16/08
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
VINTAGE TECHNICS LINEAR TRACKING TURNTABLE

 MODEL
TECHNICS SL-5 / SL5
#...H041
LINEAR TRACKING
 FULLY-AUTOMATIC
 MADE IN JAPAN
 Circa 1982-8
3

SOLD 7/31/08

 

 

    

               NEW LISTING 12/27/10
(Click on above thumbnails to enlarge photos)

CheckMarkSmall_web.jpg (792 bytes) warranty
VINTAGE TECHNICS LINEAR TRACKING TURNTABLE RESTORED / REFURBISHED
    
MODEL TECHNICS SL-5 SL5
#...H012
LINEAR TRACKING
 FULLY-AUTOMATIC
 MADE IN JAPAN
 Circa 1982-83

SOLD 6/27/11

w/ Audio-Technica AT80, Diamond stylus cartridge installed

 

 



     

NEW LISTING 8/21/12
 
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)  warranty
 
VINTAGE TECHNICS LINEAR TRACKING TURNTABLE RESTORED / REFURBISHED
     
MODEL TECHNICS SL-5
SL5
 #...H026


 
 LINEAR TRACKING
  FULLY-AUTOMATIC
  MADE IN JAPAN
  Circa 1982-83

SOLD 10/1/12

SHIPPED TO PENNSYLVANIA

 



    

NEW LISTING 10/13/10
 
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
  VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
       TECHNICS SL-20SL20
  #...D260
BELT DRIVE
FULLY MANUAL
Made in Japan
Circa 1977-78 

SOLD 11/13/10


w/ new AT-301 Elliptical Diamond stylus cartridge installed
 

 

   
Technics_SL-23_Stereo_Turntable_web_.jpg (63812 bytes)

Technics_SL-23_Stereo_Turntable_collage_.jpg (219037 bytes)


 TECHNICS
VINTAGE STEREO TURNTABLE

TECHNICS SL-23
SOLD 11/30/04
Technics_SL-23_D017_web.jpg (15019 bytes)  

Technics_SL-23_D017_collage.jpg (100031 bytes)



TECHNICS STEREO TURNTABLE
TECHNICS SL-23
SOLD


       NEW LISTING 4/16/08
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
 
TECHNICS
STEREO TURNTABLE

 MODEL
TECHNICS SL-23 SL23
#3M01

 BELT DRIVE
 FULLY MANUAL / AUTO-RETURN
 Made in Japan
 
Circa 1977-78 

SOLD 5/20/08


w/ new AT Elliptical Diamond stylus cartridge installed

 

 

 

   


NEW LISTING 4/23/10
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
  
TECHNICS
 STEREO TURNTABLE
  MODEL
TECHNICS SL-23 SL23
 #...E165
  BELT DRIVE
  FULLY MANUAL / AUTO-RETURN
  Made in Japan
  Circa 1977-78
SOLD 4/26/10

 

 

   
Technics_SL-220_Stereo_Belt-drive_Turntable_web.jpg (48493 bytes)   Technics_SL-220_Stereo_Belt-drive_Turntable_collage.jpg (181229 bytes)

Technics_SL-220_Turntable_Details_collage.jpg (45391 bytes)

 TECHNICS
VINTAGE STEREO TURNTABLE
TECHNICS SL-220
SOLD 1/13/05


       NEW LISTING 4/16/08
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
 TECHNICS
VINTAGE STEREO TURNTABLE

 MODEL
TECHNICS SL-220 / SL220
#...B115

 BELT DRIVE
 SEMI-AUTOMATIC

 Made in Japan
 
Circa 1978 
SOLD 8/29/08


w/ new AT Elliptical Diamond stylus cartridge installed

 


 


    

           NEW LISTING 3/25/09
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
 
VINTAGE
TECHNICS
STEREO TURNTABLE

 MODEL
TECHNICS SL-220 / SL220
#...B115 / C316

 BELT DRIVE
 SEMI-AUTOMATIC

 Made in Japan

 
Circa 1978 

SOLD 3/3/10

 

 

  





VINTAGE TECHNICS STEREO TURNTABLE
TECHNICS SL-230
SOLD 1/5/06
 
Technics_SL-230_Stereo_Turntable_web_CBS.jpg (100566 bytes)

Technics_SL-230_Stereo_Turntable_collage_CBS.JPG (313107 bytes)


VINTAGE TECHNICS STEREO TURNTABLE
REPAIRED AND RESTORED
TECHNICS SL-230
SOLD 11/10/04

 

 
Technics_SL-235_Stereo_Stacker-Changer_Turntable_Phonograph_web.jpg (77524 bytes)  

  Technics_SL-235_Stereo_Stacker-Changer_Turntable_Phonograph_collage.jpg (205952 bytes)

 TECHNICS
VINTAGE STEREO TURNTABLE
TECHNICS SL-235
SOLD 3/30/04 
 


 

 

 
Technics_SL-1400MK2_Turntable_Parts_web.jpg (32156 bytes)  

 TECHNICS
VINTAGE STEREO TURNTABLE
TECHNICS SL-1400 MK2 DJ STYLE

SOLD

 

 

 
 
Technics_Turntable_SL-1500_web.jpg (40058 bytes) 

Technics_Turntable_SL-1500_collage.jpg (160070 bytes)


TECHNICS
VINTAGE STEREO TURNTABLE
TECHNICS SL-1500 DJ STYLE
SOLD 


 

(Click on above thumbnails to enlarge photos)

TECHNICS SL-1500 / SL1500
DIRECT
DRIVE
FULLY MANUAL
SEMI-PRO
DJ STYLE
STEREO TURNTABLE

SOLD 9/17/07


    

NEW LISTING 3/25/09
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
TECHNICS
 STEREO TURNTABLE
       
TECHNICS SL-1500 SL1500
#...9A107 
DIRECT DRIVE
 FULLY MANUAL
 SEMI-PRO
DJ STYLE
 Made in Japan
 
Circa 1976-80 
SOLD 4/6/08

&

w/ NEW AT-71E  Elliptical Diamond stylus cartridge installed


 



   


 NEW LISTING 5/9/12
 
(Click on above thumbnails to enlarge photos)
 warranty

 VINTAGE TECHNICS STEREO TURNTABLE
TECHNICS SL-1500 / AKA SL-150
 #...E488 
 DIRECT DRIVE
  FULLY MANUAL
SEMI-PRO
  Made in Japan
  Circa 1976-80 

SOLD 5/17/12
  We have just had the table completely gone through by our turntable tech, cleaning inside and out, lubricating mechanism, adjusting tone arm and testing performance. Internal speed centering pots cleaned with 'De-Ox-Id' and adjusted back to 'center'. External (user) speed adjustment controls then cleaned with 'De-Ox-Id'. Speed checked and verified for accuracy with test strobe disc against built-in strobe monitor. Spindle bearing disassembled, varnished lube removed, cleaned and properly re-lubed. Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. Original dust cover just had fresh buff, and looks decent with a few minor "battle scars" (see photos above). Hinge area solid with both original hinges intact and hold dust cover in 'up-right' position with no sagging. Original rubber mat, still supple and flexible with no hardening. RCA patch cables re-soldered to circuit board. Also, Technics SL-1500's came with some fairly 'anemic' feet installed from the factory. We removed what was left of those and replaced them with a set of our new, Sorbothane Iso Pods.
We installed, a brand new Audio-Technica AT-95E "Green" Elliptical diamond stylus, magnetic cartridge and optimized the tone arm for it. (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!
  


   TECHNICS SL-1500 Features:


 
  

 
 TECHNICS SL-1500 TABLE SPECIFICATIONS:
  

  Motor and Turntable Drive System:
....
  Platter:
.....

  Speeds:
33 1/3 and 45 rpm
  Tone arm Type:
....
.
  Overhang:
XXXXmm
   Cartridge Weight range:
...

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

 

 .....Again, this table has been completely gone through by our turntable technician.......


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?
 

 Includes our standard 30 day limited warranty.
  TECHNICS SL-1500 SL1500 / SL-150 / SL150 Turntable
  Cond. 8.5

 W/ DUST COVER
SOLD 5/17/12
&
W/ SET OF NEW SORBOTHANE® ISO PODS AND NEW AUDIO TECHNICA CARTRIDGE INSTALLED




To connect to computer for burning CD's or to a modern A/V receiver that does not have phono inputs, just order one of our inexpensive $29.99 Phono Pre-Amps and cable kits.

 

 



(Click on above thumbnails to enlarge photos)

NEW LISTING 8/30/07
CheckMarkSmall_web.jpg (792 bytes) warranty
TECHNICS SL-1600MK2
FULLY AUTOMATIC
DIRECT DRIVE
QUARTZ LOCK
"PROFESSIONAL"

DJ STYLE STEREO TURNTABLE

SOLD 9/10/07

 


(Click on above thumbnails to enlarge photos)

NEW LISTING 9/10/07 #2
CheckMarkSmall_web.jpg (792 bytes) warranty
TECHNICS SL-1600MK2
FULLY AUTOMATIC
DIRECT DRIVE
QUARTZ LOCK
"PROFESSIONAL"

DJ STYLE STEREO TURNTABLE

SOLD 9/12/07


 



      

NEW LISTING 10/22/10/08#3
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
    
     TECHNICS SL-1600MK2 sl1600mkii
"SEMI-PROFESSIONAL"
FULLY AUTOMATIC

DIRECT DRIVE
QUARTZ LOCK
#...F016

 Circa 1976-80
 Made in Japan

SOLD 11/2/10
w/ new AT-301 Elliptical Diamond stylus cartridge installed

 

 

    

    


NEW LISTING 10/3/19
08

 
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)  warranty

COMPLETELY SERVICED / REFURBISHED
CLASSIC AND BEAUTIFUL TECHNICS TURNTABLE
TECHNICS SL-1700-MKII
 STEREO TURNTABLE

 DIRECT DRIVE
 SEMI-AUTOMATIC (AUTO-RETURN-SHUT-OFF)
with
CARTRIDGE

#...A106
 Made in Japan
 Circa 1978-80

SOLD 10/16/19
SHIPPING TO LYN IN CALIFORNIA

ü Our technician has completely gone through and 'Certified' this unit .
 

 
ü Tested / analyzed and passed for motor noise and 60Hz hum.

ü Internal / 'Circuit Board mounted' adjustable platter speed potentiometers cleaned and CENTERED for 'ZERO'd' 'User pots'

ü External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü Tone arm, 'Lead In / Out' adjusted and tested.

ü Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. Stop mechanism adjusted and tested.
 
ü Rubber mat still supple and flexible with no hardening.
 
ü Platter speed checked and verified for 100% accuracy with our factory test strobe disc following above restoration.
 
ü Platter tested for 'true flat' and no 'run-out'

ü Matt finish, vinyl installed across existing front panel blemishes

ü Upgraded, Heavy duty, shielded RCA interconnects installed w/ Gold plated plugs to replace the stock cables.

ü Stanton, RS-500DJ cartridge installed and tone arm adjustments optimized for it.

ü Tone Arm weighting and ‘skating’ adjusted for proper tracking with test tone record and O-Scope (although after shipment, you'll need to simply re-weight it, but the point is, that both adjustments correlate with each other well).

ü Original dustcover had an 'ALL SIDES'buff, and while still retains a few of the deeper 'battle scars', it looks acceptable (see photos above). Hinges adjusted to hold it upright as well. (note; this is an incredibly well designed and built dust cover, and is of acrylic about 3 times the thickness of most covers).

ü Cartridge / head shell ‘overhang’ / alignment adjusted using shop 'Stevens' calibration scale.
 
ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record
 
ü Unit test cycled through 12+ LP’s flawlessly

You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to a 'modern AV receiver' that doesn't have a pre-amp built-in, or computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.

  
Again, we have completely gone through the table, testing for speed accuracy, rumble, wow-flutter, noise isolation, tone-arm function and internal mechanism operation. Table now functions perfectly and looks great!
Measures 18" wide x 16" deep x 6" tall and weighs 22 lbs unpacked. Comes with our standard 30 day limited warranty.
TECHNICS SL-1700MK2
Cond. 8.5

SOLD 10/16/19
SHIPPING TO LYN IN CALIFORNIA

(Cons. R.R.)

W/ Dust Cover
& Stanton Diamond stylus cartridge installed

 
(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)
 

 

   

NEW ADDITION 4/17/12
 (Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)  warranty
STEREO TURNTABLE TECHNICS SL-1950
 FULLY-AUTOMATIC / STACKER / CHANGER TURNTABLE
 DIRECT DRIVE
  MADE IN JAPAN
  Circa 1977-78

SOLD 4/18/12
 
We have just had the table completely gone through. Entire table's auto-start / stop / changer mechanism was COMPLETELY disassembled, including 'Main Gear' assembly, 'Actuating Plate' assembly, 'Stop Plate' assembly & 'Tone-Arm Actuator' assembly, every part cleaned of old, gummy lube, re-lubed and reassembled (huge undertaking, by the way). Internal speed centering pots cleaned with 'De-Ox-Id' and adjusted back to 'center'. External (user) speed adjustment controls then cleaned with 'De-Ox-Id'. Speed checked and verified for accuracy following tear down / service / re-assembly with our factory test strobe disc. Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. Lead In / Out adjusted for both LP and 45's. Cuing mechanism disassembled, cleaned and re-lubed w/ fresh 500,000 grade silicone damping fluid. 'Umbrella' stacker spindle replaced with correct, functioning spindle. Both 33 1/3 stacker spindles and 45 stacker spindles tested and included (also includes the 'single play / short' spindle). After replacing the stacker spindle, we actually were able to successfully stack and drop 6 LP's, repeatedly (generally much past 3 is doing good.)  (Also, a note about these particular spindles. While they are a great design (similar to the classic 'Dual' turntable designed spindles), there is a LOT going on inside them. We went through 3 to get one that had the correct tension to drop 6 LP's correctly and consistently and do it repeatedly. The first two, sometimes would drop 2-3 LP's at a time, or 5 at a time or just be 'sporadic'. We deduced what the issues were with the spindles, but the only way the spindle issue could be addressed, was to come up with a correctly functioning one that worked in combination with the table. An expensive proposition, considering the value of even 'as-is' Technics changer / stacker spindles. Just FYI).
All functions now work great! Rubber mat, still supple and flexible with no hardening. As the original feet on this series of Technics turntables was 'natural rubber' and were of course deteriorated, we have replaced them with a set of our new, Sorbothane Iso Pods. Dust cover looks fantastic with only very minor wear. No cracks, splits, chips or deep gouges. Original Technics' dust cover hinges hold dust cover up well.

We
have inspected and tested the included, Ortofon FF10XE, Elliptical diamond stylus, magnetic cartridge and optimized the tone arm for it. (This table does have a 1/2", "universal" mount head shell, so any standard, 1/2" mount cartridge will fit it.) (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!
 
  


Included Ortofon FF10XE Cartridge Specs are as follows:

Cartridge Design: Moving Magnet, Standard 1/2" mount design
Stylus Type: xRadial @ xx x 0.x mil Diamond Stylus
Cantilever: xx


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

Frequency Response: 20-20kHz
Output voltage: ~xxmV ( 1kHz, 5 cm/sec)
Overall mass: xgrams
Recommended Vertical Tracking Force: xxgrams
Recommended loading impedance: xxK ohms (standard, requires only standard phono pre-amp built-into most gear).


.....Again, this Technics SL-1950, DD, Fully-Auto, Stacker / Changer turntable has been completely gone through. .....

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

Includes our standard 30 day limited warranty.
Technics Stacker / Changer Turntable SL-1950
  Cond. 8.5++
  $XXX.
 w/dust cover
SOLD 4/18/12
&

W/ SET OF NEW SORBOTHANE® ISO PODS AND NEW AUDIO TECHNICA CARTRIDGE INSTALLED




To connect to computer for burning CD's or to a modern A/V receiver that does not have phono inputs, just order one of our inexpensive $29.99 Phono Pre-Amps and cable kits.

 

 

 

   

   

 


NEW LISTING 12/22/14
(Click on above thumbnails to enlarge photos)

CheckMarkSmall_web.jpg (792 bytes)  warranty
RESTORED / REFURBISHED  
STEREO TURNTABLE MCS 6700 (Technics SL-1950)
  FULLY-AUTOMATIC / *STACKER /
*CHANGER TURNTABLE
  DIRECT DRIVE
   MADE IN JAPAN
   Circa 1977-78

SOLD 1/11/15
SHIPPED TO COLORADO
  
ü  Our technician has completely gone through and 'Certified' this unit . Entire table's auto-start / stop / changer mechanism was COMPLETELY disassembled, including 'Main Gear' assembly, 'Actuating Plate' assembly, 'Stop Plate' assembly & 'Tone-Arm Actuator' assembly, every part cleaned of old, gummy lube, re-lubed and reassembled (huge undertaking, by the way).

ü  Tone-arm ‘Cueing’ mechanism disassembled, cleaned and re-filled with fresh 500,000 silicone fluid.

ü  Tone-arm height adjusted

ü  Tone-arm 'lift height' adjusted.

ü  Fresh 500,000 silicone damping in the cuing mechanism and cuing speed adjusted.

ü  Tone-arm ‘Auto’ functions restored, adjusted and tested

ü  Tone-arm lead ‘In / Out’ adjusted

ü  Internal speed centering pots cleaned with 'De-Ox-Id' and adjusted back to 'center'.

ü  External (user) speed adjustment controls then cleaned with 'De-Ox-Id'.

ü  Speed checked and verified for accuracy following tear down / service / re-assembly with our factory test strobe disc.

ü  Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy.

 ü  Entire table was cleaned inside and out

ü  Speed checked and verified for accuracy with our shop strobe disc.

ü Tested / analyzed and passed for motor noise and 60Hz hum

ü  Rubber mat, still supple and flexible with no hardening.

ü Original feet in perfect condition

ü Unit test cycled through 6 LP’s flawlessly


ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record

We installed a fresh / new, Audio-Technica AT-92, Elliptical diamond stylus, magnetic cartridge and optimized the tone arm for it. (This table does have a 1/2", "universal" mount head shell, so any standard, 1/2" mount cartridge will fit it.) (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.

ü Original included, but we did not address it's cosmetics. Could be much improved, but that would add considerably to the tables cost. It is perfectly functional. Hinges hold it upright as well
  
Fully Auto, MCS-6700 (Technics SL-1950) Direct Drive Stereo Turntable. Good solid performer. With the exception of the 'un-addressed' dust cover, the balance of the table looks great and works fine.

MCS 6700 Features include:

   
...text omitted / archived

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


    
MCS 6700 TABLE SPECIFICATIONS:
  
...text omitted / archived

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


 
Included Audio-Technica AT-92ECD Cartridge Specs are as follows:
 
Frequency Response: xxkHz
Output: xx mV @ 1kHz
Recommended Vertical Tracking Force: xxgrams
Recommended loading impedance: xxK ohms (standard, requires only standard phono pre-amp built-into most gear)


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?
.
 

Again, this MCS 6700, DD, Fully-Auto, (Stacker / Changer with the correct spindle) turntable has been completely gone through. It looks and works great and is ready to go! Includes an e-copy of the owners manual.  Measures 17" wide x 14.75" deep x 6.5" tall and weighs 16 lbs unpacked. Includes our standard 30 day limited warranty.
MCS 6700 (Technics SL-1950)
Cond. 8.5 (not counting dust cover)

(C) R.R.

SOLD 1/11/15
SHIPPED TO COLORADO
w/'UGLY' but, 'FUNCTIONAL' dust cover

 & NEW AUDIO TECHNICA CARTRIDGE INSTALLED



 

    

NEW ADDITION 4/16/12
 (Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)  warranty
STEREO TURNTABLE TECHNICS SL-3300
FULLY-AUTOMATIC DIRECT DRIVE TURNTABLE
  MADE IN JAPAN
  Circa 1980-81
SOLD 4/21/12
 We have just had the table completely gone through. Entire table's auto-start / stop mechanism was COMPLETELY disassembled, every part cleaned of old, gummy lube, re-lubed and reassembled (huge undertaking, by the way). Internal speed centering pots cleaned with 'De-Ox-Id' and adjusted back to 'center'. External (user) speed adjustment controls then cleaned with 'De-Ox-Id'. Speed checked and verified for accuracy following tear down / service / re-assembly with our factory test strobe disc. Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. Cuing mechanism disassembled, cleaned and re-lubed w/ fresh 500,000 grade silicone damping fluid. All functions work great! Rubber mat, still supple and flexible with no hardening. All original 'shock absorbing' feet intact. Dust cover looks great with only very minor wear. No cracks, splits, chips or deep gouges. Hinge tab in original 'unbroken' condition. Original Technics' dust cover hinges hold dust cover up well.

We
installed, a brand new Audio-Technica, AT-95E / 'Green', Elliptical diamond stylus, magnetic cartridge and optimized the tone arm for it. (This table does have a 1/2", "universal" mount head shell, so any standard, 1/2" mount cartridge will fit it.) (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!
 
  Turntable SL-3300 Features include:

   .......

Turntable SL-3300 TABLE SPECIFICATIONS:
 
 Motor and Turntable Drive System: .......
 Platter: ......
 Speeds: 33 1/3 and 45 rpm
 Tone arm Type: ....
Wow and Flutter: .....
Rumble:-.....


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


Effective Arm Length; .....
Overhang; ....
Effective Mass; ....
Offset angle; .....
Tracking Error: ......
Tracking range: ......
Useable Gross Cartridge Weight range: .....
Useable Gross Cartridge Weight range w/ head shell: .....
Cartridge type:
.......

Included Cartridge Specs are as follows:

Cartridge Design: .....
Stylus Type: ......
Frequency Response: ....
Output voltage: ......
Channel Separation: .....


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


Channel Balance: .....
Recommended Vertical Tracking Force: XX
Recommended loading impedance: XXK ohms (standard, requires only standard phono pre-amp built-into most gear).


....Again, this Technics SL-3300, DD, Fully-Auto turntable has been completely gone through....


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

 Includes our standard 30 day limited warranty.
Technics Fully Automatic, Direct-Drive Turntable SL-3300
$XXX
w/dust cover
SOLD 4/21/12
&
w/ NEW Audio-Technica 'AT-95e' Elliptical Diamond stylus cartridge installed

 

 




NEW LISTING 7/14/05

VINTAGE TECHNICS STACKER / CHANGER TURNTABLE
TECHNICS SL-3350

SOLD 8/31/05

 

 
 

    

       NEW LISTING 4/8/11
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
 
VINTAGE
TECHNICS STEREO TURNTABLE
           TECHNICS SL-B2 SLB2
  BELT DRIVE
 SEMI-AUTOMATIC
#...D079
 
 Made in Japan

  
Circa 1980-82 
  TECHNICS SL-B2 STEREO TURNTABLE
w/ dust cover (C)
J.W.
SOLD 6/2/11

 
 w/ NEW AT-92E Elliptical Diamond stylus cartridge installed

  



 

 

    



        NEW LISTING 10/18/17
 (Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)  warranty
RESTORED / REFURBISHED / FULLY SERVICED
VINTAGE
TECHNICS STEREO TURNTABLE
TECHNICS SL-B3 / SLB3
#...G269
FULLY-AUTOMATIC
QUIET, BELT DRIVE
MADE IN JAPAN
Circa 1979-80

SOLD 10/12/18
SHIPPING TO TONY IN ILLINOIS


ü  Our technician has completely gone through and 'Certified' this unit, cleaning inside and out, lubricating mechanism, adjusting tone arm lead out and testing performance.
 
ü  Entire internal 'Auto' mechanisms COMPLETELY disassembled, cleaned and re-lubed (never an easy task on 'auto' turntables).
 
ü  Platter spindle disassembled, cleaned of old lube and re-lubed.
 
ü  Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy.
 
ü  Tone arm Lead-In and Lead-Out.
 
ü  Tone arm bearing perfectly smooth in operation.
 
ü Main shaft gear repaired.

ü  Fresh, NEW main drive belt installed for years of trouble-free service

ü  Internal 'speed control' pots cleaned and adjusted for 'center' position on 'user / external' controls
 
ü  Speed checked and verified for accuracy with technician's factory test strobe disc against built-in strobe.
 
ü  Original rubber mat, still supple and flexible with no hardening.
 
ü  Original dust cover just had a fresh, 3-stage buff and looks GREAT, with no significant scratches or scuffs, and no cracks or splits, even around the hinge flanges
 
ü  Original dustcover hinges hold cover upright as well

ü  RCA Output cables checked for signal flow and consistency
 
 We re-installed the ADC XSM-MKII
, Eliptically cut diamond stylus, Magnetic Cartridge and optimized the tone arm for it (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.)
ü Cartridge / head shell ‘overhang’ adjusted using shop calibration scale.

ü Tested / analyzed and passed for motor noise and 60Hz hum.

ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record

ü Unit test cycled through 12+ LP’s flawlessly
 
Following the above technical restore work,
this table looks fine, functions perfectly and sounds great!

Great condition, Quiet Belt Drive, Fully Auto, Technics, SL-B3 Turntable. Utilizes a 'universal' head-shell for standard fit, 1/2" mount cartridges (again, the table comes with the "ADC XSM-MKII" Cartridge pre-installed from us.
Good solid performer. Looks good, works fine, reliable and easy to use. What else do you need?!

You can readily connect this table to any receiver (including 'modern / A/V / Home Theater receivers) or Integrated amplifier with a standard magnetic phono input, or an external Phono Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.


 

Again, this table has been completely gone through and original dust cover just had a fresh buff and not only is crack free, but for the most part free of distracting scuffs / scratches. Only very minor cosmetic wear. Hinges and 'hinge areas' of dust cover completely intact, and hinges hold dust cover up perfectly well. There's just a bit of 'finish wear' in front of the 'strobe light' (see photos above).  It looks, works great and is ready to go! You will not be disappointed in this table for all around use. Looks and works great! Includes an 'e' copy / pdf download of the Technics SL-B3 owners / users / instruction manual. Measures 17" wide x 14" deep x 5.5" tall and weighs 9 lbs unpacked. Includes our standard 30 day limited warranty.
TECHNICS SL-B3 STEREO TURNTABLE

Cond. 8.5+++

(Cons.) R.R.
SOLD 10/12/18
SHIPPING TO TONY IN ILLINOIS


 & w/ ADC XSM-MKII, Elliptically cut, Diamond stylus cartridge installed w/ 6+mV output!

To connect to computer for burning CD's or to a modern A/V receiver that does not have phono inputs, just order one of our inexpensive $42.99 Phono Pre-Amps and cable kits.

 
(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)

 

 

 

 
Technics_SL-B5_turntable_Changer_web.JPG (94925 bytes)   Technics_SL-B5_turntable_Changer_collage.JPG (188008 bytes)


VINTAGE TECHNICS STEREO TURNTABLE
REPAIRED AND RESTORED STACKER / CHANGER TURNTABLE
TECHNICS SL-B5 / SLB5
SOLD 11/3/03
     

         NEW LISTING 12/20/14
(Click on above thumbnails to enlarge photos)

CheckMarkSmall_web.jpg (792 bytes)  warranty
RESTORED / REFURBISHED
VINTAGE TECHNICS TURNTABLE
TECHNICS SL-B35 / SLB35
FULLY AUTOMATIC / BELT DRIVE
TURNTABLE
#...B134
Made in Japan
Circa early 1980’s

SOLD 12/16/15
SHIPPING TO MASSACHUSETTS

ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, cleaning and re-lubricating mechanism, adjusting tone arm height, lead OUT and 'auto return' mechanism and testing performance.

ü Internal speed pots, adjusted for centering and speed checked and verified for accuracy with our factory test strobe disc against built-in strobe monitor.

ü Fresh belt installed.

ü External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy.

ü 'Auto' mechanism adjusted and tested.

ü Original rubber mat, still supple and flexible with no hardening.

ü Original feet in fine condition.

ü We also re-installed and adjusted the existing, Stanton ‘D71E’, elliptically cut Diamond, magnetic cartridge and optimized the tone arm for it. (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.)
You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.

ü Original dustcover had a fresh buff, and looks fine. Hinges hold it upright as well.

ü Tested / analyzed and passed for motor noise and 60Hz hum.


ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record

ü Unit test cycled through 6 LP’s flawlessly.

Great performing Technics SL-B35, Belt Drive, Fully Automatic turntable. Following the above restoration, it functions correctly and performs well.

Technics SL-B35 Turntable Features:

 
...TEXT OMITTED / ARCHIVED

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


 
Again, our turntable tech has completely gone through it testing for speed accuracy, rumble, wow & flutter, noise isolation, tone-arm function and lubed internal mechanism. Also installed a new belt for years of trouble-free service. Original dust cover is in fabulous shape after a fresh plastic buff / hand polish. Table looks good and works great! Comes with a great performing, Stanton D71E, Elliptically cut, diamond stylus cartridge. Ready to play!!! (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) Measures 17" wide x 14.5" deep x 4.5" tall and weighs 9 lbs unpacked. Comes with our standard 30 day limited warranty.
RESTORED / REFURBISHED TECHNICS SL-B35 STEREO TURNTABLE
Cond. 8.5

SOLD 12/16/15
SHIPPING TO MASSACHUSETTS

(C) R.R.

W/ DUST COVER
&
'Stanton' Elliptical Diamond stylus cartridge installed

 

 

 


 
          

NEW LISTING 12/20/2020
(Click on above thumbnails to enlarge photos)

  warranty
FULLY SERVICED / REFURBISHED
VINTAGE TECHNICS TURNTABLE
TECHNICS SL-B35 / SLB35
FULLY AUTOMATIC / BELT DRIVE
TURNTABLE
#...B122
Made in Japan
Circa early 1980’s
SOLD 3/27/2021
SHIPPED TO TRAVIS IN WASHINGTON


ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, removing 35+ year old 'stiff' grease that almost always impedes mechanism movement, cleaning and re-lubricating mechanism, adjusting tone arm height, lead OUT and 'auto return' mechanism and testing performance.

ü Internal speed pots, cleaned as initial 'speed adjustment' would not stabilize. Following cleaning, then adjusted for centering and speed checked and verified for accuracy with our factory test strobe disc against built-in strobe monitor.

ü New / Fresh belt installed.

ü External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy.

ü 'Auto' mechanism adjusted and tested.

ü Original rubber mat, still supple and flexible with no hardening.

ü New 'Ground' wire installed w/ 'Spade' lug

ü New RCA patch cables included

ü Original feet in fine condition.

ü We also re-installed and adjusted the existing, ShureLTP-2’, elliptically cut Diamond, magnetic cartridge and optimized the tone arm for it. (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.)
You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.

ü Original dustcover had a moderate buff, and while still has some scuffing, it looks presentable. Original 'hinge tabs' do have some broken sections, but are still functional. Hinges hold it upright as well.

ü Tested / analyzed and passed for motor noise and 60Hz hum.

ü Unit tested with our myriad of test records, one of which included; Shures' 'Cartridge Obstacle Course' record

ü Unit test cycled through 6 LP’s flawlessly.

Great performing Technics SL-B35, Belt Drive, Fully Automatic turntable. Following the above restoration, we tested automatic functions through 10 LP sides, and it functions correctly, performs well and sounds great. Cosmetically the table looks great. The original dust cover is included, but is not 'issue free'. It was fairly 'scuffed on the top when it arrived, but did get some moderate buffing which 'helped' it look much better and is now 'presentable'. The original plastic tabs do have some 'chips / sections' missing, but do still function. The original hinges are in good shape and do allow the dust cover to be held in it's 'UP' position.

Technics SL-B35 Turntable Features:

 
...TEXT OMITTED / ARCHIVED

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

 
Shure LTP-2 Phono Cartridge Specifications:

The Shure LTP-2 phono cartridge offers P-mount T4P convenience, high performance and musical accuracy. It is a quality P-mount cartridge.
Output voltage @ 1kHz, 5cm/sec: 4mV
Channel balance: within 2dB
Channel separation (minimum): 20dB @ 1000Hz
Frequency response: 20Hz-20kHz
Stylus type: 0.0004 x 0.0007 inch elliptical
Stylus construction: Bonded
DC Resistance: 1550 Ohms
Cantilever construction: Alloy tube
Tracking force range: 1.25 - 1.5 g
Recommended load resistance: 47k ohms


Again, our turntable tech has completely gone through it testing for speed accuracy, rumble, wow & flutter, noise isolation, tone-arm 'Auto' functions and lubed internal mechanism. Also installed a new belt for trouble-free service. Original dust cover is in good shape as mentioned above after a fresh plastic buff / hand polish. Table looks good and works great! Comes with a great performing, Shure LTP-2, Elliptically cut, diamond stylus cartridge. Ready to play!!! Measures 17" wide x 14.5" deep x 4.5" tall and weighs 9 lbs unpacked. Comes with our standard 90 day limited warranty.
RESTORED / REFURBISHED TECHNICS SL-B35 STEREO TURNTABLE
Cond. 8.5

SOLD 3/27/2021
SHIPPED TO TRAVIS IN WASHINGTON


W/ DUST COVER
&
'SHURE LTP-2' Elliptical Diamond stylus cartridge installed

(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)

 

  

 

Technics_SL-B101_Stereo_Beltdriven_Turntable_web.jpg (44883 bytes) 

  Technics_SL-B101_Stereo_Beltdriven_Turntable_collage.jpg (174512 bytes)

TECHNICS SL-B101
TURNTABLE

SOLD 11/30/06

 
   
 

   




NEW LISTING 10/11/10
 
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
    
TECHNICS
SL-B200 SLB200
 BELT DRIVE
SEMI-AUTOMATIC

 Made in Japan
 
Circa 1983-84 
SOLD 11/19/10


w/ Stanton D71EE Elliptical Diamond stylus cartridge installed

 

 

Technics_SL-B202_Stereo_Belt-drive_Turntable_web.jpg (46030 bytes)   

Technics_SL-B202_Stereo_Belt-drive_Turntable_collage.jpg (165273 bytes)


(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
TECHNICS SL-B202
SEMI-AUTOMATIC
BELT DRIVE
STEREO TURNTABLE
"WORLD AC POWER"
Circa 1977-82

SOLD 1/25/08


Unit looks a lot better in "real life" than in the highly compressed photos.
 

 





NEW LISTING 10/11/10
 
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
    
TECHNICS SL-B210 slb210

 SEMI-AUTOMATIC
 BELT DRIVE
#...E248

Made in Japan
 
Circa early-mid 1980's
w/ dust cover
&
w/ Stanton D71EE Elliptical Diamond stylus cartridge installed

SOLD 12/8/10
Technics_SL-B300_Stereo_Turntable_web.jpg (64252 bytes)

Technics_SL-B300_Stereo_Turntable_collage.jpg (227035 bytes)       Technics_SL-B300_Dust_cover_issues_collage.jpg (30979 bytes)

(Click on above thumbnails to enlarge photos)
TECHNICS SL-B300
TURNTABLE

SOLD 6/27/06


 



       NEW LISTING 4/16/08
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED

     
TECHNICS SL-B300 SLB300
 BELT DRIVE
 FULLY AUTOMATIC
 Made in Japan
 
Circa 1983-84 
SOLD 2/9/11

 

 


    

(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)warranty
TECHNICS SL-B350
FULLY AUTOMATIC
BELT DRIVE
TURNTABLE

SOLD 12/7/07

 

 

Technics_SL-B500_Stereo_Turntable_web.jpg (72968 bytes)

Technics_SL-B500_Stereo_Turntable_collage.jpg (262148 bytes)       Technics_SL-B500_Stereo_Turntable_spindles_collage.jpg (94008 bytes)


TECHNICS SL-B500
TURNTABLE

SOLD 8/31/05



 
 
 

    

    

NEW LISTING 7/2/15
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)  warranty
RESTORED / REFURBISHED
PRE-OWNED TECHNICS STEREO TURNTABLE REFURBISHED
TECHNICS SL-BD10
FULLY MANUAL
BELT DRIVE

 #...A543

 Circa 1986
MIJ

SOLD 11/13/17
SHIPPING TO MICHIGAN

Our technician has completely gone through and 'Certified' this unit  cleaning inside and out, lubricating mechanism, adjusting tone arm and testing performance. Speed checked and verified for accuracy with both internal strobe and the shop calibrated strobe disc. Super quality Gimbal tone-arm bearing. Tracks grooves well. Original dust cover just had fresh buff, and looks decent, with only minor scuffing (see photos above). Original hinges and hinge tabs in fine and functioning condition and holds dust cover in the 'up' position fairly well. No cracks, chips, or hairlines. All four original 'shock absorber' feet intact. Original rubber platter mat, lays perfectly flat with no blistering, bubbles or warps. We also inspected and re-installed existing Pickering DLE, elliptically cut diamond stylus, on the, P-mount head shell.  (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!
 ____________________________________
  
Decent quality and easy to use. Great if you 'just want to play records' and are fine with 'fully manual' operation.
  Technics SL-BD10 features: 


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

  
...


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?

 
 
Again, our turntable tech has completely and EXTENSIVELY gone through this Technics SL-BD10 turntable as stated above and 'certified' it's ready to go! Then tested for speed accuracy, rumble, wow-flutter, noise isolation, tone-arm bearing function. Table functions perfectly and looks near fine! Measures 17" wide x 14" deep x 4" tall and weighs 7 lbs. Comes with our standard 30 day limited warranty.
TECHNICS SL-BD10 STEREO TURNTABLE
  Cond. 8.5

w/ dust cover
(C) R.R.

SOLD 11/13/17
SHIPPING TO MICHIGAN


 w/ Pickering DLE, Elliptical Diamond stylus cartridge installed




To connect to computer for burning CD's or to a modern A/V receiver that does not have phono inputs, just order one of our inexpensive $42.99 Phono Pre-Amps and cable kits.

(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)
 

 

  

 

 

 
Technics_SL-BD30_Automatic_Turntable_Record-Player_web.jpg (44524 bytes)   Technics_SL-BD30_Automatic_Turntable__Record-Player_collage.jpg (190160 bytes)

TECHNICS SL-BD35
SOLD

 




NEW LISTING 12/6/07
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
 TECHNICS SL-D2
 SEMI-AUTOMATIC
 DIRECT DRIVE
STEREO TURNTABLE

SOLD 12/17/07



 

       NEW LISTING 4/16/08
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
  TECHNICS
STEREO TURNTABLE

 
 TECHNICS SL-D2 / SLD2
 
 SEMI-AUTOMATIC
 
 DIRECT DRIVE
 
 MADE IN JAPAN
 
 Circa 1980-81
SOLD 7/24/08


w/ new AT Elliptical Diamond stylus cartridge installed

 

 

 


    

            NEW LISTING 12/27/10
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
TECHNICS SL-D2

 
 SEMI-AUTOMATIC
 
 DIRECT DRIVE
 
 MADE IN JAPAN
 
 Circa 1980-81
  w/ out dust cover
SOLD 3/22/11

 
 w/ new AT-301 Elliptical Diamond stylus cartridge installed
 

 



NEW LISTING 5/20/09
 
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
   TECHNICS
 STEREO TURNTABLE

   
TECHNICS SL-D3 / SLD3
   FULLY-AUTOMATIC
   DIRECT DRIVE
   MADE IN JAPAN
   Circa 1979-80

SOLD 7/23/09

 & w/ new AT Elliptical Diamond stylus cartridge installed

 

  
Technics_SL-DL22_web.jpg (16750 bytes)

Technics_SL-DL22_collage.jpg (113231 bytes)


TECHNICS SL-D22
SOLD

 





TECHNICS
SL-D22
TURNTABLE

SOLD 2/6/07

 

 

NEW LISTING 12/3/08
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
  TECHNICS
STEREO TURNTABLE

TECHNICS SL-D202

#...B581 
 
SEMI-AUTOMATIC

 
 DIRECT DRIVE
 
 MADE IN JAPAN
 
 Circa 1981
SOLD 12/10/08


w/ new AT Elliptical Diamond stylus cartridge installed

 

 



     

NEW LISTING 12/19/08
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
  TECHNICS
STEREO TURNTABLE

TECHNICS SL-D202

#...C104 
 
SEMI-AUTOMATIC

 
 DIRECT DRIVE
 
 MADE IN JAPAN
 
 Circa 1981
SOLD 12/19/08

 

   

 

 




        NEW LISTING 6/23/08
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
TECHNICS
STEREO TURNTABLE

TECHNICS SL-D303
 
FULLY AUTOMATIC
 
DIRECT DRIVE
 
Circa 1981

SOLD 7/21/08

 

 

   





TECHNICS SL-DL1
TURNTABLE

SOLD 11/18/06

 


 



           NEW LISTING 12/27/10
(Click on above thumbnails to enlarge photos)

CheckMarkSmall_web.jpg (792 bytes) warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
    
TECHNICS SL-DL1 sldl1
 FULLY-AUTOMATIC
 DIRECT DRIVE
LINEAR TRACKING
#...
0083
 MADE IN JAPAN
 Circa 1980-8
3
SOLD 2/4/11

 

Technics_SL-DL5_web.jpg (18398 bytes) 

  Technics_SL-DL5_collage.jpg (81234 bytes)

TECHNICS
TECHNICS SL-DL5
TURNTABLE
SOLD

 
Technics_SL-J2_Web.jpg (26378 bytes)

TECHNICS SL-J2
SOLD

 
    

NEW LISTING 4/26/05

TECHNICS SL-J2
STEREO TURNTABLE
SOLD 4/26/05

 

 

    

         NEW LISTING 5/12/16
(Click on above thumbnails to enlarge photos)

CheckMarkSmall_web.jpg (792 bytes)  warranty
RESTORED / REFURBISHED

VINTAGE TECHNICS LINEAR TRACKING TURNTABLE
TECHNICS SL-J2 LINEAR TURNTABLE
Circa 1984-86
MIJ

SOLD 1/3/18
SHIPPING TO TENNESSEE

ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, cleaning out ‘gelled’ lubes (a ‘MUST DO’ on all pre-owned / vintage turntables) and re-lubricating mechanism, including entire 'carriage mechanism'. Arm mechanism belt replaced with new #045. Speed tested to >99% accuracy. Dust cover had 2-Stage buffing. Hinge system intact and holds lid in upright position.

Again, our turntable tech has completely and EXTENSIVELY gone through this Technics SL-J2 turntable as stated above and 'certified' it's ready to go! Table looks great with fresh "buff" to dust cover. Very clean! This is very similar to one of the tables I use personally. Utilizes "P" mount cartridge. Comes with Audio-Technica / Realistic RX-1500 cartridge / stylus. If you prefer an up-grade you may also select from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost. Everything works great! 
Includes an 'e' copy / pdf download of the Technics SL-J2 owners / users / instruction manual. Measures 12 1/2" wide x 12 1/2" deep x 3.5" tall (closed) and weighs 9 lbs unpacked. Includes our standard 30 day limited warranty.
TECHNICS SL-J2 LINEAR TRACKING TURNTABLE
 
Cond. 9

SOLD 1/3/18
SHIPPING TO TENNESSEE

(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)

 

  

    

    

          NEW LISTING 11/2018
(Click on above thumbnails to enlarge photos)

CheckMarkSmall_web.jpg (792 bytes) warranty
RESTORED / REFURBISHED

VINTAGE TECHNICS LINEAR TRACKING TURNTABLE
TECHNICS SL-L1 LINEAR TURNTABLE

- FULLY AUTOMATIC -
- DIRECT DRIVE -
- LINEAR TRACKING -
- STEREO TURNTABLE -
Circa 1986-90
MIJ

SOLD 6/25/19
SHIPPED TO HEATHER IN OHIO

ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, cleaning out ‘gelled’ lubes (a ‘MUST DO’ on all pre-owned / vintage turntables) and re-lubricating mechanism, including entire 'carriage worm gear mechanism'. Arm travel mechanism, disassembled, cleaned and re-lubed w/ 500,000 grade silicone gel. Arm mechanism belt replaced with new #045. Speed tested to 100% accuracy. Dust cover had 2-Stage buffing, however still has some surface scuffing. Also, some of the white silk-screening is worn from the top (see photos above). Hinge system intact and holds lid in upright position. Total tech time 4+ hours.
These are great tables to use. Technics Fully Automatic - Linear tracking, SL-L1, stereo turntable. Essentially "Close and Play". Technics' Linear tables by nature are great if you have cats or children as they must be closed to operate and when the cover is lifted the fragile parts (ie the tone arm and cartridge goes up with the lid. Very dust free, due to lid / cover design and almost impossible to damage your records with! 
 


Again, our turntable tech has completely and EXTENSIVELY gone through this Technics SL-L1 turntable as stated above and 'certified' it's ready to go! Table looks good with fresh "buff" to dust cover, but still shows typical wear. Nothing distracting. This is very similar to one of the tables I use personally (mine's just smaller). Utilizes "P" mount cartridge. Comes with a Stanton E71EE cartridge / stylus. If you prefer an up-grade you may also select from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost. Everything works great! Includes an 'e' copy / pdf download of the Technics SL-L1 owners / users / instruction manual. Measures 17" wide x 14" deep x 3.5" tall (closed) and weighs 16 lbs unpacked. Includes our standard 30 day limited warranty.
TECHNICS SL-L1 LINEAR TRACKING TURNTABLE
Cond. 8.5
(Cons.) R.R.

SOLD 6/25/19
SHIPPED TO HEATHER IN OHIO


To connect to computer for burning CD's or to a modern A/V receiver that does not have phono inputs, just order one of our inexpensive $42.99 Phono Pre-Amps and cable kits.

 

(Above text, in it's entirety, property of www.oaktreevintage.com / Oak Tree Enterprises, LLC. See 'Copyright Information' page for details)

 

 

 

 

   
 

   


NEW LISTING 4/11/09
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)
warranty
 
TECHNICS
 STEREO TURNTABLE
 
TECHNICS SL-Q2 / SLQ2
 SEMI
-AUTOMATIC
 
DIRECT DRIVE
 
QUARTZ LOCK
#...A397

 
Circa 1979-81
SOLD 5/11/08

w/ NEW AT-71E  Elliptical Diamond stylus cartridge installed

 

 

    

    

NEW LISTING 12/20/14
(Click on above thumbnails to enlarge photos)

CheckMarkSmall_web.jpg (792 bytes)  - warranty
RESTORED / REFURBISHED
VINTAGE TECHNICS TURNTABLE
TECHNICS SL-Q2 / SLQ2
FULLY AUTO
DIRECT DRIVE
STEREO TURNTABLE
RESTORED / REFURBISHED
#...A323
Made in Japan
Circa 1979-81
-
SOLD 12/24/14

ü Our technician has completely gone through and 'Certified' this unit cleaning inside and out, cleaning and re-lubricating mechanism, adjusting tone arm height, lead OUT and 'auto return' mechanism and testing performance.

ü Internal speed pots, adjusted for centering and speed checked and verified for accuracy with our factory test strobe disc against built-in strobe monitor.

ü External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü Tone-arm / head-shell ‘Overhang’ adjusted using shop chart

ü Gimbol bearing, counter weight and anti-skating all adjusted and verified for accuracy. 'Auto' mechanism adjusted and tested.

ü Original rubber mat, still supple and flexible with no hardening.

ü Original feet in fine condition.

ü We also installed and adjusted a fresh, new, Audio-Technica ‘AT-92ECD’, elliptically cut Diamond, magnetic cartridge and optimized the tone arm for it.- (If you prefer an up-grade you may also choose from our selection of new Audio-Technica cartridges that we can also set up and ship with it for the additional cartridge cost.)
You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. -

ü  Tested / analyzed and passed for motor noise and 60Hz hum

ü Unit test cycled through 6 LP’s flawlessly

ü  Unit tested with our myriad of test records, one of which included: Shures' 'Cartridge Obstacle Course' record

Great performing Technics SL-Q2, Direct Drive, Semi-Automatic turntable. Following the above restoration, it functions correctly and performs well.

Technics SL-Q2 Turntable Features:

...text omitted / archived


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?



TECHNICS SL-Q2 TURNTABLE TABLE SPECIFICATIONS:

...text omitted / archived

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?



- Included Audio-Technica AT-92ECD Cartridge Specs are as follows:
- 
Frequency Response: xxkHz
Output: xxmV @ 1kHz
Recommended Vertical Tracking Force: xxgrams


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


Recommended loading impedance: xxK ohms (standard, requires only standard phono pre-amp built-into most gear).


Again, this table has been completely gone through by our turntable tech
- testing for speed accuracy, rumble, wow-flutter, noise isolation, tone-arm function and lubed internal mechanism. Works and sounds great. As long as you do not need a dust cover, it looks great and is ready to go! You will not be disappointed in this table for all around use. Will include an ‘e’ copy / pdf download of the Technics SL-Q2 Owners / users manual. Measures 17" wide x 14.75" deep x 4" tall and weighs 10 lbs unpacked. Includes our standard 30 day limited warranty.
TECHNICS SL-Q2 STEREO TURNTABLE
Cond. 8.
5
- (due to missing dustcover)
SOLD 12/24/14

W/ AUDIO-TECHNICA ‘92ECD’ / ELLIPTICALLY CUT DIAMOND CARTRIDGE INSTALLED

 
 


(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
TECHNICS SL-Q3
FULLY AUTOMATIC
DIRECT DRIVE
QUARTZ LOCK
TURNTABLE

SOLD 9/13/07


 



    



            NEW LISTING 5/08/10
 
(Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes) warranty
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
   TECHNICS SL-Q3 SLQ3
FULLY AUTOMATIC
DIRECT DRIVE
QUARTZ LOCK
#...E042
Circa 1979-81

   
"WORLD AC POWER"

MIJ
  SOLD 11/29/10

w/ Shure Elliptical Diamond stylus cartridge installed

 

 

Technics_SL-Q5_Linear_Tracking_Turntable_web.jpg (23541 bytes)

Technics_SL-Q5_Linear_Tracking_Turntable_collage.jpg (173288 bytes)

VINTAGE TECHNICS LINEAR TRACKING TURNTABLE
TECHNICS SL-Q5
SOLD 10/15/04 
  Technics_SL-Q30_Stereo_Turntable_web.jpg (31269 bytes)   

  Technics_SL-Q30_Stereo_Turntable_collage.jpg (201743 bytes)


VINTAGE TECHNICS TURNTABLE
TECHNICS SL-Q30
DIRECT DRIVE / QUARTZ LOCKED
P-MOUNT CARTRIDGE

SOLD 09/21/04

 

 

Technics_SL-Q202_Stereo_Turntable_web.jpg (57921 bytes)

Technics_SL-Q202_Stereo_Turntable_collage.jpg (159397 bytes)

VINTAGE TECHNICS TURNTABLE
DIRECT DRIVE / QUARTZ LOCKED
P-MOUNT CARTRIDGE

TECHNICS SL-Q202
SOLD 10/28/04


 
   

NEW LISTING 12
/5/13
(Click on above thumbnails to enlarge photos)

CheckMarkSmall_web.jpg (792 bytes)  - warranty
RESTORED / REFURBISHED
VINTAGE TECHNICS TURNTABLE
TECHNICS SL-Q300
FULLY AUTO
DIRECT DRIVE
STEREO TURNTABLE
 RESTORED / REFURBISHED
#...D416
Made in Japan
Circa 19
84-87-
SOLD 6-12-14
SHIPPED TO CALIFORNIA

ü  Our technician has completely gone through and 'Certified' this unit cleaning inside and out, cleaning and re-lubricating mechanism, adjusting tone arm height, lead OUT and 'auto return' mechanism and testing performance.

ü  Internal speed pots, adjusted for centering and speed checked and verified for accuracy with our factory test strobe disc against built-in strobe monitor.

ü  External / 'user' adjustable platter speed potentiometers cleaned for smooth speed transition and 'glitch-free' adjustment.

ü  Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. 'Auto' mechanism adjusted and tested.

ü  While the original dust cover just had fresh buff and looks acceptable.

ü  Dust cover hinges are perfect and still hold cover in it's 'upright' position.

ü  Original rubber mat, still supple and flexible with no hardening. Original feet in fine condition.

ü  We also re-installed and adjusted the existing, Audio-Technica ATU4030LC, elliptically cut Diamond, magnetic cartridge and optimized the tone arm for it. (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.)
You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits.
All functions work great! Again, this table looks and works great!


ü - Unit tested with our myriad of test records, one of which included: Shures' 'Cartridge Obstacle Course' record

Great performing Technics SL-Q300, Direct Drive, Fully Automatic turntable.
Following the above restoration, it functions correctly and performs well.
Technics SL-Q300 Turntable Features:

...text omitted / archived


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?



TECHNICS SL-Q300 TURNTABLE TABLE SPECIFICATIONS:

...text omitted / archived


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?



Again, this table has been completely gone through by our turntable tech, looks and works great and is ready to go! You will not be disappointed in this table for all around use. Looks handsome and works great! Measures 17" wide x 14.75" deep x 4" tall and weighs 10 lbs unpacked. Includes our standard 30 day limited warranty.
TECHNICS SL-Q300 STEREO TURNTABLE
Cond. 8.5-
SOLD 6-12-14
SHIPPED TO CALIFORNIA


W/ AUDIO-TECHNICA ATU4030LC CARTRIDGE INSTALLED

& ORIGINAL DUST COVER

 

 
 


     

           NEW LISTING 8/21/12
 
 (Click on above thumbnails to enlarge photos)
CheckMarkSmall_web.jpg (792 bytes)  warranty
 
VINTAGE TECHNICS STEREO TURNTABLE RESTORED / REFURBISHED
           TECHNICS SL-QD33
SLQD33
 FULLY AUTOMATIC
 DIRECT DRIVE
 QUARTZ LOCK
 #...B148

 Circa 1986
MIJ

SOLD 9/6/12
SHIPPED TO VERMONT

  We have just completely gone through the turntable cleaning inside and out, lubricating mechanism, adjusting tone arm and testing performance. Speed checked and verified for accuracy with both internal strobe and the shop calibrated strobe disc. Super quality Gimbal tone-arm bearing. Stop mechanism adjusted and tested. All functions work great! Original dust cover just had fresh buff, and looks very good, with only light scuffing! Original hinges and hinge tabs in fine and functioning condition and holds dust cover in the 'up' position well. No cracks, chips, or hairlines. All four original 'shock absorber' feet intact. Original rubber platter mat, lays perfectly flat with no blistering, bubbles or warps. We also inspected and re-installed existing Audio-Technica DC-20, elliptically cut diamond stylus, on the, P-mount head shell.  (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table looks and works great!!

 ____________________________________
  
  Great quality and easy to use. What more could you ask for?! The Technics SL-QD33. Designed utilizing a Quartz locked motor for constant platter rotation speed and good isolation characteristics. Very quality build and like most Technics turntables, it's 'built like a tank'.
  Also features: 

  
...TEXT OMITTED / ARCHIVED


HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?
  
TECHNICS SL-QD33 SPECIFICATIONS:

  
...TEXT OMITTED / ARCHIVED

HEY, WHY ALL THE 'X'd' OUT / OMITTED SPECS AND TEXT?


 
  Again, we have had the table completely gone through, testing for speed accuracy, rumble, wow-flutter, noise isolation, tone-arm function and lubed internal mechanism. Table functions perfectly and looks near fine! Measures 17" wide x 14.5" deep x 5.5" tall and weighs 10 lbs. Comes with our standard 30 day limited warranty.
  TECHNICS SL-QD33 STEREO TURNTABLE
  Cond. 8.5

 
 $239. w/ dust cover
SOLD 9/6/12
SHIPPED TO VERMONT

 
 w/ Audio-Technica D20 Elliptical Diamond stylus cartridge installed

 

 


 

Technics_SL-QL5_Linear_Tracking_Turntable_web.jpg (23834 bytes)   

  Technics_SL-QL5_Linear_Tracking_Turntable_collage.jpg (131820 bytes)

Technics_SL-QL5_Linear_Tracking_Turntable_P-28_Cartridge_web.jpg (19392 bytes)

VINTAGE TECHNICS LINEAR TRACKING TURNTABLE RESTORED / REFURBISHED
TECHNICS
SL-QL5

SOLD 6/16/04
 

 
Technics_SL-QX300_Direct-Drive_Fully-Automatic_Turntable_web.jpg (25355 bytes)   Technics_SL-QX300_Direct-Drive_Fully-Automatic_Turntable_collage.jpg (183334 bytes)

VINTAGE TECHNICS TURNTABLE
TECHNICS SL-QX300
DIRECT DRIVE / QUARTZ LOCKED
P-MOUNT CARTRIDGE


SOLD
CLICK HERE TO SEE OUR TURNTABLES
 CURRENTLY FOR SALE!

We are trying to ready more 78 RPM, 16 RPM and changer /
 stacker tables, but it is slow going. We will post more as 
soon as they become ready! Keep checking or email to get 
on the waiting list. Thanks!!!