(Click on above thumbnails to enlarge photos)

NEW LISTING 8/14/07
warranty
PIONEER
PL-55D
DIRECT DRIVE
MANUAL
STEREO TURNTABLE
WORLD AC POWER
Circa 1975-'78 
for sale
We have just had the table completely gone through by CBS turntable services cleaning inside and out, lubricating mechanism, adjusting tone arm and testing performance. Due to issues with the "55" series "Auto-Return", we had them, as typical on these, disconnect the "Auto-Return" function. This makes this a great "Manual" table, very similar to the one we use in our main demo, audio system here at Oak Tree. Speed checked and verified for accuracy with test strobe disc against built in strobe monitor. Gimbal bearing, counter weight and anti-skating all adjusted and verified for accuracy. Plinth suspension all functioning. All stop mechanisms adjusted and tested. Tone arm "lead-in" adjusted for proper distance. All functions work great! Original dust cover just had fresh buff by CBS, looks great and hinges functions fine. Original rubber mat, still supple and flexible with no hardening. CBS also re-installed and adjusted the existing, Shure Pro-6, eliptical stylus cartridge (see specs below) and optimized the table for it.  (If you prefer an up-grade you may also choose from our selection of new Audio Technica cartridges that we can also set up and ship with it for the additional cartridge cost.) You can readily connect this table to any receiver, Integrated amplifier with a standard magnetic phono input, or a Pre-amp. To connect to computer for burning CD's just order one of our inexpensive Phono Pre-Amps and cable kits. Again, this table and works great!!

TABLE SPECIFICATIONS:

Motor: Brushless DC servo-controlled motor
Drive System: Direct
Platter:  3+ lb Solid Aluminum
WOW & Flutter: 0.060%
Signal to Noise: >55dB
Pitch Control:  2%
Tone arm type: Static-balanced, Metal S-shaped pipe arm (with plug-in head shell)
Effective Arm Length: 221 mm
Overhang: 15.5 mm
Counter weight range: 0-4 grams
Cartridge: Accepts all 1/2" mount with a cartridge mass range of 4-14 grams

Existing Cartridge Specifications
Shure Pro-6

Stylus Tip Shape:  0.3 x 0.7 mil Bi-radial Elliptical
Frequency Response:  15 to 26,000 Hz
Output @ 1kHz, 5cm/sec:  5.0mV
Channel Balance:  Within 1.5 dB
Channel Separation: 1 kHz 22dB; 10 kHz 18dB
Tracking Force:  1.25 grams (although we recommend to track at least with 1.5 grams and preferably 1.8 grams of weight)
Tackability at 400Hz:  22 cm/sec (84 microns)
Recommended Load Impedance:  47 K
Recommended Capacitive Load:  200-300pF
Net Weight:  5.9 grams

Very nice, Fully Manual, Direct Drive Pioneer PL-55X turntable. Super quality at a great mid-price range. Looks gorgeous! Wood grain vinyl wrap upper base / plinth and charcoal finish lower base. Very handsome cosmetics.
 Features:

- Direct Drive
- DC Servo motor for super smooth and quiet operation
- Heavy 3.5 lb aluminum platter / heavy rubber mat assembly for reduced low frequency resonance and speed stability
- Classic "S" tone arm
 - Standard 1/2" mount quick disconnect head shell
- Strobe monitored for platter speed accuracy
- 33 1/3 and 45 RPM speeds with separate strobe controls for each speed
- Oil damped tone arm cuing
- Adjustable Tracking force and 
- Adjustable Anti-Skating
-True WORLD AC POWER  allows unit to be operated on 50 or 60 Hz AC and will select voltages from 110v, 120v, 220v and 240 volts AC input for use anywhere in the world. 


Will play 33 or 45 RPM discs. Again, this table has been completely gone through by CBS turntable services, looks and works great and is ready to go! You will not be disappointed in this table for all around use. Looks and works great! Measures 19" wide x 16.5" deep x 6.75" tall and weighs 26 lbs unpacked. Includes our standard 90 day limited warranty.
PIONEER PL-55D
Cond. 9 (cosmetics)
XXXX