| MOST
OF THE PARTS LISTED BELOW ARE FROM SALVAGE UNITS. |
|
*Note
about parts sales
* Our "parts units" & parts are primarily archived for the purpose of
restoration / repair of "Oak Tree Vintage" units first. Only if we do not have a
"viable" unit
in yet, either already in process or in line to be processed, that may
potentially need parts from a "parts unit", will we release available parts for
sale. As many of you know, the restoration of a unit can be a long, time
consuming process. We may "lock up" parts that we may potentially need in the
restoration of a unit. Parts are priced by the "potential value" of the unit
they can be applicable to (meaning the amount WE would be willing to pay for the
part if that was all that was standing between us having a "shelved unit" or a
valuable / sellable unit), time to extract, their rarity & their condition to name a few criteria.
A non-response to an email request for a part (we may appear to have),
likely means that we are still determining which parts we are going to need for
the restoration or repair of one of our units. Again, the parts are first for the restoration of
our units and
secondarily for the public market. Since we list the parts available for
ourselves, it is not much effort to modify the menu's for web publication.
Frankly, publishing them to the web, in many instances, makes it easier for us
to determine if we have the part for our needs as well. The alternative would be
to not offer them at all to the public, however most parts are available
to the public for sale. Thank you for your understanding.
|
| --
|
|
|
|
|
|
|
SANSUI INTEGRATED AMPLIFIERS AMPS PARTS AND PARTS UNITS:
|
NEW LISTING
7/25/07
(Click on above thumbnails to enlarge photos)
SANSUI
B-3000 B3000
STEREO
POWER AMPLIFIER
SOLD 11/5/08
"WORLD
AC POWER"
™
for sale
Amp looks great, but unfortunately it has a channel out.
One side of the amplifier produces
39.5 volts per channel @ 8 ohms for 195 wpc
and 24 volts per channel @ 4 ohms for
144 watts per channel via
discrete, epoxy outputs.
True "WORLD
AC POWER"™
as it will work on both 50 or 60 Hz AC and voltages from 110-240 volts
AC
.
The amplifier is fan
cooled. There are no visibly
burned components.
We simply don't have the resources currently to spend
on restoring it. Again, it would likely be a good candidate for
restoration! Restore it or use it as a great single channel power
amp for a center channel speaker in a home theater system, or a sub woofer or for a practice PA amp. Measures 17" wide x
9" deep x 5" high
and weighs 25 lbs unpacked.
Sansui B-3000
As-Is
SOLD 11/5/08
|
- |
- |
SANSUI RECEIVER PARTS AND PARTS RECEIVER UNITS:
|
(Click on above thumbnails to enlarge photos)
SANSUI
MODEL 441
STEREO
RECEIVER PARTS
Some parts MAY also fit Sansui models 331, 441, 551, 661,
771 & 881
Parting out.
Wood grain vinyl covered Case - Excellent (may
fit other models in this series) - SOLD
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Some parts may also fit Sansui models 331, 441, 551,
661, 771 & 881
Face panel with glass (less knobs / buttons)
Normal minor wear - $40.
Tuning knob
- $25.
Large round knobs - $20 ea
Tone knobs - $20. ea
- Push Switch caps -
$12. ea
VU / Tuning meter - $25 SOLD
Power supply Transformer (4002100) - $45.
Power supply filter Caps (2200uf / 50 volts - $15 ea.
Power amplifier outputs STK 016 - $35.
ea side. - SOLD
Some parts may also fit Sansui models 331, 441, 551,
661, 771 & 881
Any single circuit board
(less pots, switches, large transformers, outputs)
- $35.
- Tuning capacitor & Tuning circuit board - $35
Power / Speaker selector switch - $35.
Any control pot (volume
250k x2, Bass / Tone / Treble, Balance
)
- $25. ea
SOLD
Ganged controls - Additional $15. ea.
Push switches (Loudness, Tape Monitor, Mode) - $18. ea.
Input Selector Rotary Switch - $35.
Some parts may also fit Sansui models 331, 441, 551,
661, 771 & 881
Rear panel (less AM antenna) - $45 complete (while parts last)
- Fuse insert cap - SOLD
Voltage selector assembly - $30.
Bottom sheet metal panel - SOLD
Any single rear panel Input / Output component (speaker output strips, RCA
panels, etc.) - $20. ea
AM antenna - $25.
Most other parts $20-$45.ea
Feet set of 4 - $25. or $12.
ea.
Call or email for part availablity.
Call or Email for part you need.
|
(Click on above thumbnails to enlarge photos)
SANSUI
MODEL 5000
STEREO
RECEIVER PARTS
for sale
Parting out. Wood case in
NEW condition. Unit in very good shape with only minor wear to some of the front
panel silk screening. Parting out.
Inquire for part you
need.
SANSUI 5000
Wood Case - Excellent (MAY
fit other models in this series) - $55.
- SOLD
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Face panel with glass (less knobs / buttons)
worn silk screening on Selector and Volume controls - $39.-
Tuning knob
- $25.
Volume / Input Selector / Speaker knob knobs - $20 ea
Tone or Mic / Balance knobs (concentric sets) - $20. ea
- Push Switch caps -
$12. ea
VU / Tuning meter - $25
SANSUI 5000
Power supply Transformer (400-5292C)- $45.
Power supply filter Caps ( 80V / 2200uf )
- $20 ea.
Power amplifier outputs ( 4x Toshiba 2SD118)- $22.50
ea transistor.
Any single circuit board except F-6013
driver boards.
(less large pots, switches, large transformers, outputs)
- $35. ea
F-1040 - SOLD
F-1041
F-1042
F-1036
F-1056
F-1137
SANSUI 5000
- Tuning capacitor - $35 ea.
Any control pot (not individually listed already) - $25. ea
Ganged controls - Additional $15. ea.
Volume Control (Stacked 250K, Center Tapped on top)
- $35. - SOLD
Any push switch - $25. ea
Power Switch (Rectangular switch body, not round version) - $25.00
Rotary Selector Switches (Function / Input)- $30. ea.
Fuse insert cap - $18. ea.
Speaker output clips - $25 set of 4
SANSUI 5000
Voltage selector assembly - $30.
Any single rear panel Input / Output component (speaker output strips, RCA
panels, etc.) - $25. ea
AM antenna - $30.
Feet set of 4 - $25. or $12.
ea.
Most other parts $20-$45.ea
Call or email for part availablity.
|
(Click on above thumbnails to enlarge photos)
SANSUI
MODEL 5000A
STEREO
RECEIVER PARTS
for sale
Parting out. Wood case in
NEW condition. Unit in very good shape with only minor wear to some of the front
panel silk screening. Parting out.
Inquire for part you
need.
SANSUI 5000A 5000 A
Wood Case - Excellent (MAY
fit other models in this series) - $55.
(Cases, covers and side plate / panels, etc. do not include
mounting screws as those are sold separately)
Face panel with glass (less knobs / buttons)
worn silk screening on Selector and Volume controls - $39.
Tuning knob
- $25.
Volume / Input Selector / Speaker knob knobs - $20 ea
Tone or Mic / Balance knobs (concentric sets) - $20. ea
- Push Switch caps -
$12. ea
VU / Tuning meter - $25
SANSUI 5000A 5000 A
Power supply Transformer - $45.
Power supply filter Caps (90V / 1500uf ) ( 80V / 2200uf
) - $20 ea.
Power amplifier outputs ( 4x Toshiba 2SD426)- $22.50
ea transistor.
Any single circuit board except F-6013
driver boards.
(less large pots, switches, large transformers, outputs)
- $35. ea
Circuit bds: F-1040 (X2)
F-1041A
F-1042
F-1036
F-1120 - SOLD
F-1137A
F-6013 X2 DRIVER BOARD - $45. ea
SOLD OUT
SANSUI 5000A 5000 A
- Tuning capacitor - $35 ea.
Any control pot (not individually listed already) - $25. ea
Ganged controls - Additional $15. ea.
Volume Control (Stacked 250K, Center Tapped on top)
- $35. - SOLD
Any push switch - $25. ea
Power Switch (Rectangular switch body, not round version) - $25.00
Rotary Selector Switches (Function / Input)- $30. ea.
Fuse insert cap - $18. ea.
SANSUI 5000A 5000 A
Voltage selector assembly - $30.
Bottom sheet metal panel - $20
Any single rear panel Input / Output component (speaker output strips, RCA
panels, etc.) - $25. ea
AM antenna - $30.
Feet set of 4 - $25. or $12.
ea.
Most other parts $20-$45.ea
Call or email for part availablity.
Call or Email for part you need.
|
(Click on above thumbnails to enlarge photos)
SANSUI
MODEL 2000
STEREO
RECEIVER PARTS
for sale
Parting out due to problems with right side outputs. Wood case in
NEW condition. Very good shape with only minor wear to some of the front
panel silk screening. Parting out.
Inquire for part you
need.
Many of the parts
MAY also fit the 1000, 3000, 4000 & 5000 models
such as switches, pots, controls and knobs.
Wood Case - Excellent (may fit other models in this series) - $55.
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
SANSUI 2000
Face panel with glass (less knobs / buttons)
worn silk screening on Selector and Volume controls - $39.
Tuning knob
- $25.
Large round knobs - $20 ea
Tone knobs (concentric sets) - $20. ea
- Push Switch caps -
$12. ea
VU / Tuning meter - $25
Power supply Transformer (400-5285) - $45.
Power supply filter Caps - $15 ea.
Power amplifier outputs (Toshiba 2SC493, one side remaining) - $35.
ea side.
SANSUI 2000
Any single circuit board
(less pots, switches, large transformers, outputs)
- $35.
- Tuning capacitor - $35
Any control pot - $25. ea
Ganged controls - Additional $15. ea.
Volume Control - SOLD
Any switch - $25. ea
SANSUI 2000
Rear panel - $65 complete (while parts last)
- Fuse insert cap - $18. ea.
Voltage selector assembly - $30.
Bottom sheet metal panel - $20
Feet set of 4 - $25. or $12.
ea.
Any single rear panel Input / Output component (speaker output strips, RCA
panels, etc.) - $25. ea
AM antenna - $25.
Most other parts $20-$45.ea
Call or email for part availablity.
Call or Email for part you need.
|
(Click on above thumbnails to enlarge photos)
SANSUI
MODEL 3300
QUAD STEREO
RECEIVER PARTS
for sale
Parting out due to problems with left
side outputs. Wood case in decent shape. Missing a couple of knobs. Call
or Email for part you need
HOLD ENTIRE UNIT FOR TIM S.
11/15/06 |
(Click on above thumbnails to enlarge photos)
SANSUI
MODEL 5000X
STEREO
RECEIVER PARTS
for sale
Parting out. Wood case in
NEW condition. Unit in very good shape with only minor wear to some of the front
panel silk screening. Parting out.
Inquire for part you
need.
SANSUI 5000X 5000 X
Wood Case - Excellent (may fit other models in this series) - $55.
(Cases, covers and side plate / panels, etc. do not include
mounting screws as those are sold separately)
Face panel with glass (less knobs / buttons)
worn silk screening on Selector and Volume controls - $39.
Tuning knob
- $25.
Volume / Input Selector / Speaker knob knobs - $20 ea
Tone or Mic / Balance knobs (concentric sets) - $20. ea
- Push Switch caps -
$12. ea
VU / Tuning meter - $25
SANSUI 5000X 5000 X
Power supply Transformer (4000970) - $45.
Power supply filter Caps (90V / 1500uf ) ( 80V / 2200uf
) - $20 ea.
Power amplifier outputs ( 4x Toshiba 2SC1079)- $22.50
ea transistor. (HELD FROM
SALE FOR FURTHER TESTING)
Any single circuit board except F-6013
driver boards.
(less large pots, switches, large transformers, outputs)
- $35. ea
Circuit bds:
F-1006
F-1042
F-1038
F-1052
F-1056
F-1137A
F-1219
F-1350
F-6013 X2 DRIVER BOARD - $45. ea SOLD OUT
F-6016
SANSUI 5000X 5000 X
- Tuning capacitor - $35
Any control pot (not individually listed already) - $25. ea
Ganged controls - Additional $15. ea.
Volume Control - (Stacked 250K, Center Tapped on top)
- $35. - SOLD
Any push switch - $25. ea
Power Switch (Rectangular switch body, not round version) - $25.00
Rotary Selector Switches - $30. ea.
Rear panel - $65 complete (while parts last)
Fuse insert cap - $18. ea.
SANSUI 5000X 5000 X
Voltage selector assembly - $30.
Bottom sheet metal panel - $20
Feet set of 4 - $25. or $12.
ea.
Any single rear panel Input / Output component (speaker output strips, RCA
panels, etc.) - $25. ea
AM antenna - $30.
Most other parts $20-$45.ea
Call or email for part availablity.
Call or Email for part you need.
|
Click on above thumbnails to enlarge photos)
SANSUI
MODEL 5000
STEREO
RECEIVER PARTS
for sale
Power Switch (round version) - $25.00 SOLD
|
- |
- |
(Click on above thumbnails to enlarge photos)
SANSUI
G-7700
STEREO
RECEIVER PARTS
- PARTING OUT -
Many of the parts such as switches, pots, controls and knobs
MAY
also fit
the Sansui G-5700 / G-6700 / G-7700 / G-8700 / G-9700 models.
Unit sounded strong and great, but had an issue with the tuner readout being
locked on one frequency.
- PARTING OUT -
Face panel (good, very minor scuffs on bottom edge and top edge)- $75.
Large tuning round knob - $35. SOLD
Large volume round knob - $35.
SOLD
Small round knobs - $25. each SOLD OUT
Mic knob - $18. SOLD
Switch caps - $12. each
Power supply Transformer ( # 4003090 )- $75.
SOLD
Power supply filter caps - $55 (for both sides)
Power supply protector circuit board - $65
Power amplifier (complete on circuit board F-3058, with
2x SK C2581N & 2x SK A1106N output transistors) - $45
per side. SOLD OUT
Any single circuit board (less pots, switches, large transformers,
outputs) - $45.
Driver board F3060 - $45. SOLD
Tuning Circuit Board - SOLD
Tuning Digital Display - SOLD
Tuning Dial pointer - SOLD
Any pot, switch, input / output single panel section
unless listed separately - $30.
Headphone Jack - $30.
Control Pot Balance #1015341 on F-2878 circuit
board (will not work in G-8700 / 871) - $30.
Control Pots Bass / Treble #1015360 / 2x 100k
(See also G-7700, G-8700, 8700DB) - $30. ea.
Control Pot Volume #1011160 on F-2879 circuit board - $45.
Input / Function Selector switch (ALPS 1190710 / 912 K)
May work in 7700D, 8700, 8700DB, 871 and 871DB) - $45.
Power Switch (partially broken shaft, switch still works)
- as-is $20.
AM antenna (stick only, less bracket) - $20.
SOLD
AM antenna bracket - $30.
Feet set of 4 - $25. or $12.
ea.
Speaker output jack strips A or B - $25. ea.
SOLD OUT
Most other parts $25-$45.each
Call or email for part availablity. Some are already
SOLD.
|
(Click on above thumbnails to enlarge photos)
SANSUI
RECEIVER
receivers
G-4500 G4500
STEREO
RECEIVER
for sale
Will make a very nice receiver from a performance standpoint. We are
offering it on the "Salvage-Units" page as the dial lamp circuit needs
repair. Probably a reasonable easy fix, but we don't have a service manual
or the resources to spend more time on it. It's in "as-found"
condition, but does have a very strong tuner on both AM and FM bands. Also
has a "quick-off-the-line" pre-amp volume control with lots of
"punch" and headroom. Both amplifier sides produce 22 volts per
channel @ 8 ohms for 60 wpc and 18 volts per channel @ 4 ohms for 81 watts
per channel. Overall will look and perform great! No missing parts or
knobs and case in very good condition. Again a good candidate for
restoration! 120VAC / 60Hz AC power Requirements.
Measures 17" wide x 14" deep x 6" high.
Sansui G-4500
As-Is
$99. Complete
|
(Click on above thumbnails to enlarge photos)
SANSUI
G-8000
STEREO
RECEIVER PARTS
- PARTING OUT -
Huge early 80's receiver. Weighs about 60lbs and is almost 2 feet wide!
Power amplifier produces 40 volts per channel or 200 Watts per channel at
8 ohms.
Unfortunately this one has no radio output to the amplifier & selector
switch sheered.
Many of the parts such as switches, pots, controls and knobs
MAY
also fit
the Sansui G-801, 801DB, G-901, 901DB, G-9000, G-22000 & G-33000 models.
- PARTING OUT -
Sansui G-8000 / G-9000 G8000 G9000
Wood case cover (less plastic vent) - $85.
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Plastic top rear vent - $35. SOLD
Face panel - $125.
Large tuning round knob (scuffed) - $35. SOLD
Large volume round knob (scuffed) - SOLD
Large knob back bezel / trim -
$25. ea
Sansui G-8000 / G-9000 G8000 G9000
Small round knobs (Bass, Mid, Treble, Selector, Tape monitor)
- $25. each SOLD
OUT
Balance knob - $25. each SOLD
Mic knob - $25.
Switch caps (toggle or push button - $12. each
Tuning flywheel assembly w/ bushing and shaft (knob sold separately) - $35.
Power supply Transformer 4002750 8.7 - $95.
Power supply filters - $95 (for both sides)
Sansui G-8000 / G-9000 G8000 G9000
Power supply protector circuit board F-2809
(This board is used in both the G-8000 & G-9000)- $95
Power amplifier (complete while parts last) - $125.
Sansui G-8000 / G-9000 G8000 G9000
Single outputs (Sankeo 2SC14038 or 2SA745B )- $20. ea, but follows our
discount for quantity
Any single circuit board such as
F-2806 Driver board, etc. (less pots, switches, large transformers,
outputs) - $65.
F-2806 - SOLD
Sansui G-8000 / G-9000 G8000 G9000
Control Pot Volume pot - $45. SOLD
Control Pot Balance #10153400 2x 250k
(also fits the G-8700 / G-871)
- $35.
Power / Tuning (power meters range from 0-300 watts) - $35. ea.
Switch, Rotary Tape Monitor - SOLD
Switch, Rotary Selector - $55.
- SOLD
Sansui G-8000 / G-9000 G8000 G9000
Any pot, switch, input / output single panel section, not already listed
individually (ex; Tone / Treble / Mid / Bass 1015200 /
100kΩBX2,
Power Toggle switch
) - $35. ea
Speaker clip sections - $35. ea. SOLD OUT
Bottom Plate - $35
Aluminum lower side trim (Fit G-8000 & G-9000) - $30 ea. SOLD
OUT
Rear plastic Bumpers (Fit G-8000 not G-9000)
- $25. ea.
Sansui G-8000 / G-9000 G8000 G9000
Heat sinks - $35 ea.
Feet set of 5
(See also, 8080, 9090, G-871DB, G-8000, G-9000)
- $35. or $18.
ea.
SOLD OUT?
Most other parts $25-$45.each
Call or email for part availablity.
|
PHOTOS COMING
(Click on above thumbnails to enlarge photos)
SANSUI
RECEIVER
receivers
7070
STEREO
RECEIVER PARTS
Circa 1977-79
- PARTING OUT -
Unit looks near NEW! Very clean.
Many of the parts such as switches, pots, controls and knobs
MAY
also fit the Sansui 5050 / 6060 / 7070 / 8080
8080DB / 9090 9090 DB models.
- PARTING OUT -
SANSUI 7070 Receiver Parts:
Wood grain vinyl wrap case / cover - $65. Good + cond.
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Face panel (with plexi-glass)- $85.
Large tuning round knob (fits 6060, 7070, 8080 & 9090 models {5050 /
4040 unknown}) - $35.
Volume round knob - $35. SOLD
Balance Ring (same for 7070, 8080, but not 9090 including DB
versions) - $20. SOLD
Round knobs (tone, selector / tape) - $25. ea
Dolby Play Cal, Rec Level & Mic Level knobs - $25 ea.
(ONLY 1 SMALL KNOB CURRENTLY LEFT IN STOCK FOR SALE. SEE ALSO 7070, 8080
OR 9090 LISTING)
Round Switch caps - $12. ea
Toggle Switch caps - $15. ea
Power switch cap - $20.
SANSUI 7070 Receiver Parts:
Power supply Transformer - $85.
Power supply protector circuit board - $65
Power Supply Filter Caps 10,000 mF & 50 Volts - $30 ea.
Power amplifier (complete) - $95.
Or
Single Outputs
(Sanken 2SC1115 or 2SA746) - $35 ea
Heat Sink Sinks
(less outputs) - $35
SANSUI 7070 Receiver Parts:
Any single circuit board unless singled out separately
(less pots, switches, large transformers, Relays & outputs) - $45.
Examples: F-2627, F-2625
(less relay), F-2620, F-2614 (tuning circuit board with
variable tuning capacitor, but less string wheel), F-2622 (Tone
Control Board), ,
F-2626, F-2621, F-2623
F-2615
- SOLD
SANSUI 7070 Receiver Parts:
F-2624 (Driver Board) - $65
SOLD
(Will
also work on Sansui 9090 and European 990
Tuning string wheel - $30.
Dial Pointer - $25.
Power Switch (less cap) - $35.
Speaker Selector- $45.
Tone Pots - $30 ea.
SANSUI 7070 Receiver Parts:
Volume / Balance Control Pot - $55. SOLD
Loudness or Mode switches - $25. ea.
Tape Play / Monitor / Selector - $40.
Source / Input Selector Switch - $45.
Extension shaft for Tape Play - $25. ea.
Tuning flywheel assembly w/ bushing and shaft (knob sold separately) - $35.
Dolby, FM mute, MPX or Meter Select switch with chrome caps
- $25. ea.
SANSUI 7070 Receiver Parts:
Mic Level Pot Alps dual 20kΩ
w/ part #1090260 / 77S. (may be interchangeable with mic level pot on
8080) - $25.
Headphone Jack - $20.
Mic Jack - $20.
Power meters - $55 pair on plate.
Tuning Meters or Signal meter - $25. ea
Bottom Plate - $25
Feet set of 4 - $25. or $12.
ea.
SANSUI 7070 Receiver Parts:
AM stick Antenna
(less mounting bracket / ball & socket
all sold separately)
(Interchangeable
with the 7070, 8080 & 9090 9090DB)
- $35.
SOLD
AM antenna mounting ball socket
(Interchangeable with the 7070, 8080 & 9090 9090DB)
- $25. per half
SOLD OUT
AM antenna mounting bracket / ball (antenna stick and socket sold
separately) - $25.
Feet - $25. set
Fuse cap - $25.
Relay - RABK-2B - $35.
Rear Panel (sheet metal only) - $40
Rear input / speaker output jacks / AC outlet sections - $30 each.
Most other parts $25-$45.each
Call or Email for part you need.
|
(Click on above thumbnails to enlarge photos)
SANSUI
RECEIVER
receivers
8080
STEREO
RECEIVER PARTS
Circa 1977-79
- PARTING OUT -
Unit looks near NEW! Very clean.
Many of the parts such as switches, pots, controls and knobs
MAY
also fit
the Sansui 5050 / 6060 / 7070 / 8080
8080DB / 9090 9090 DB models.
- PARTING OUT -
SANSUI 8080 Receiver Parts:
Wood grain vinyl wrap case / cover - $65. Good + cond.
SOLD
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Face panel (with plexi-glass)- $85.
Bottom front wood strip for Sansui 8080 / 8080DB only.
Vinyl wrapped. Some finish peeling typically. Will not fit 9090 series - $20.
SOLD
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Large tuning round knob (fits 6060, 7070, 8080 & 9090 models {5050 /
4040 unknown}) - $35.
Volume round knob - $35. SOLD
Balance Ring (same for 7070, 8080, but not 9090 including DB
versions) - $20. SOLD
Round knobs (tone, selector / tape) - $25. ea
Dolby Play Cal, Rec Level & Mic Level knobs - $25 ea.
(ONLY 1 SMALL KNOB CURRENTLY LEFT IN STOCK FOR SALE. SEE ALSO 7070, 8080
OR 9090 LISTING)
Round Switch caps - $12. ea
Toggle Switch caps - $15. ea
Power supply Transformer - $85.
Power supply protector circuit board - $65
SANSUI 8080 Receiver Parts:
Power Supply Filter Caps - $30 ea.
Power amplifier (complete) - $95.
Any single circuit board (less pots, switches, large transformers,
outputs) - $65.
F-2549
- SOLD
F-2615
- SOLD
(Driver Board # F-2436 - SOLD
Dial Pointer - $25.
Speaker Selector (should also work on 9090 / 990 /
990db / 9090db. 2 wafers / 12 pins per wafer) - $55. SOLD OUT
SANSUI 8080 Receiver Parts:
Tone Pots - $30 ea.
Volume / Balance Control - $55. SOLD
Loudness or Mode switches - $25. ea.
Tape Play / Monitor - $55.
SANSUI 8080 Receiver Parts:
Source Selector Switch - $65. SOLD
Extension shafts for Tape Play
and Source Selector Switches - $25. ea.
Tuning flywheel assembly w/ bushing and shaft (knob sold separately) - $35.
Dolby, FM mute, MPX or Meter Select switch with chrome caps- $25. ea.
SOLD OUT
Power Switch - SOLD
Relay - RABK-4B - $35.
SOLD
Mic Level Pot part
#1090260 / 77S. (is
NOT interchangeable with mic level pot on 7070 as that unit requires a dual
layer pot)- $25.
SANSUI 8080 Receiver Parts:
Headphone Jack - $20.
Mic Jack - $20.
Power meters - $55 pair.
Tuning Meters - $55. pair
Bottom Plate - $25
Feet set of 4 - $25. or $12.
ea.
AM stick Antenna
(less mounting bracket / ball & socket
all sold separately)
(Interchangeable
with the 7070, 8080 & 9090 9090DB)
- $35.
SOLD
AM antenna mounting ball socket
(Interchangeable with the 7070, 8080 & 9090 9090DB)
- $25. per half
SOLD OUT
AM antenna mounting bracket / ball (antenna stick and socket sold
separately) - $25.
Feet set of 4
(See also, 8080, 9090, G-871DB, G-8000, G-9000) - $35. or $18.
ea. SOLD OUT?
Fuse cap - $25.
Most other parts $25-$45.each
Call or Email for part you need.
|
- |
|
(Click on above thumbnails to enlarge photos)
SANSUI STEREO RECEIVER AC POWER CORD
ALSO FITS VERNON / CHINON / SANKYO 8MM MOVIE FILM PROJECTORS
REPLACEMENT
AC POWER CORD / CABLE FOR
SANSUI EIGHT / 8, QR-4500, QR-6500, QRX-1500, QRX-3500, QRX-4500, QRX-5500, QRX-6500, QRX-7500
for sale
Replacement AC power
cord for Sansui Model 8 and QRX series Receivers and some other vintage
Sansui audio components / electronic units such as
the Sansui SD-5000 Reel to Reel. These
AC cords will also work on some 8mm film projectors such as the Chinon 727 & Vernon S-500. These
will fit the units that have 8mm spacing on 2 recessed, round prongs.
GOOD-USED
$24.99
likely used, but good condition.
Always VERY limited availability.
(Should fit Sansui
Eight / 8, QR-4500, QR-6500, QRX-1500, QRX-3500, QRX-4500, QRX-5500, QRX-6500,
QRX-7500
and any other "round" prong receptacle Sansui products from that
time period.)
AC cord also fits Chinon 727, Sankyo Dualux-8 8mm film projectors and probably
many others.
|
|
|
(Click on above thumbnails to enlarge photos)
SANSUI
9090 9090DB PARTS
STEREO
RECEIVER PARTS
- PARTING OUT -
Unit #1 works great, however the
tuner quit tuning and making any signal. All other inputs work great as
does Pre & Power Amp. Unit good cosmetically. Face, case, rear panel and face
in great
condition. Knobs all
look new.
Unit #2 worked great producing 35 volts @ 8 ohms for and 31 volts @ 4 ohms
for watts per channel. It's problem was that when you changed a source or
flipped a tape monitor switch it would "pop" violently through the outputs
and sometimes put the unit into it's "protect" mode.
Pots and switches will be cleaned prior to
shipping.
Many of the parts such as controls, pots, switches and knobs
MAY
also fit
Sansui 5050 / 6060 / 7070 / 8080
8080DB / 9090 9090 DB models.
- PARTING OUT -
Wood case cover
(good but wear on top from stacked gear) - $65 (Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Face panel with glass (less knobs / buttons / wood end caps.) - $95.
SOLD
Bottom front wood strip for Sansui 9090 / 9090DB only.
Real wood veneer. Will not fit 8080 - $20. SOLD
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Tuning knob (will also fit 6060, 7070 & 8080)- $40.
Volume knob (will also fit 6060, 7070 & 8080) - $40. SOLD?
Balance Ring (only fits 9090 and NOT 7070 or 8080) - $20.
SOLD
Dolby Large Selector knob - $30
Dolby Play Cal, Rec Level & Mic Level knobs - $25 ea.
(ONLY 1 SMALL KNOB CURRENTLY LEFT IN STOCK
FOR SALE. SEE ALSO 7070, 8080 OR 9090 LISTING)
Treble, Bass & Balance control round knobs (will also fit 6060, 7070
& 8080) - $25 ea
Round button Switch caps and / or toggle caps - $18. ea
Speaker / Selector knob - $30 ea.
SANSUI 9090
9090DB:
VU Tuning meter - $30.
SOLD
VU Signal meter - $30.
SOLD
Power VU meters - $35 ea or $60 pair
-
SOLD OUT
Power supply Transformer Part # 4002530 / 7JBE11 (version that has the
World Ac Power capability in that it will work with any voltage and comes
with voltage change selector)
- Works and looks great! - $129.
Power Rectifier board - F-2656 - $65.
Filter Caps (capacitors) Elna 80V 12,000mf - $40. ea.
Power amplifier outputs Toshiba 2SD424 or 2SB554 (call or email for complete
assemblies) - $30. ea transistor (but follows our
discount for quantity also)
SANSUI 9090
9090DB:
Any single circuit board, unless priced separately (less pots, switches, large transformers,
outputs F-2544, F-2549 Tuner Board, F-2654, F-2655, F-2653)
- $65. ea.
Output-Pre-Driver Board F-2624 - $65.
(Will also work on Sansui 7070 and European 990)
SOLD OUT
Dolby Selector / Circuit board F-2655 - $65 with switch
SOLD
Power
supply / RF Circuit board F-2619 /
F2619 - $35
Selector extension shaft - $35
Volume / Balance pots (ALPS 250K on board F-2693) - $55.
SOLD
Tone pots / switches - $35. each
SANSUI 9090
9090DB:
Power Switch - $35.
SOLD OUT
Power Switch cap (Rectangular shape, not round. Will also
fit the 7070, but not the 8080) - $25
Speaker Selector Switch
(should also work on 8080 / 880 / 880db / 8080db. 2
wafers / 12 pins per wafer)
- $55
SOLD OUT
Selector Switch on circuit board F-2653 (DB version only
with 2 Phonos) - $65.
Source Selector Switch (mounted to it's circuit board) - $65
Other switches - $30. ea
Relay ( Omron Type M Y 3 - 02-AU-Y96 24 V DC (on
F-2657 circuit board)- $35.
SOLD
White function light housing - $35.
SANSUI 9090
9090DB:
Tuning string drum wheel - $35.
Tuning flywheel assembly w/ bushing and shaft (knob sold separately) - $35.
Tuning capacitor - $45.
Rear panel (sheet metal only, less components) - $45
Fuse insert cap - $30.
Fuse holder with cap insert - $35.
Rear heat sinks - $25 ea. section
Top metal ventilation panel - $35.
Feet set of 4
(See also, 8080, 9090, G-871DB, G-8000, G-9000)- $35. or $18.
ea. SOLD OUT?
Bottom Panel - $30 (less feet)
SANSUI 9090
9090DB:
Any single rear panel RCA jack section component - $25. ea
Speaker output clips (sections for A, B or C speaker output jacks)
- $25. ea. section
Antenna Binding post section - $25
AM stick Antenna
(less mounting bracket / ball & socket
all sold separately)
(Interchangeable
with the 7070, 8080 & 9090 9090DB)
- $35.
SOLD
AM antenna mounting ball socket
(Interchangeable with the 7070, 8080 & 9090 9090DB)
- $25. per half
SOLD OUT
AM antenna mounting bracket / ball (antenna stick and socket sold
separately) - $25.
Original AC cord and grommet - SOLD
Most other parts $35-$75.ea
Call or Email for part you need if you don't see it listed.
|
(Click on above thumbnails to enlarge photos)
SANSUI
R-30
STEREO
RECEIVER PARTS
- PARTING OUT -
Power amplifier produces 20 volts
on the left or 50 Watts per channel at
8 ohms.
Unfortunately this one has a bit of DC surge when powered,
and a "cranky" noise on the right side up so we are
just going to go ahead and part it out..
Many of the parts such as switches, pots, controls and knobs
MAY
also fit
the Sansui R-30, R-50 & R-70 models.
- PARTING OUT -
Metal top panel - $25.
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Side Panels - $20. ea.
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Face panel with dial window- $45.
Large tuning round knob - $30.
Other round knobs - $25. each
Switch caps - $12. each
Power supply Transformer - $45.
Power supply filters - $95 (for both sides)
Power supply protector circuit board - $45
Power amplifier (complete) - $55.
Any single circuit board (less pots, switches, large transformers,
outputs) - $45.
Any pot, switch, input / output single panel section - $30.
Ganged controls - Additional $15. ea.
Bottom Plate - $20
Feet set of 4 - $25. or $12.
ea.
Most other parts $25-$45.each
|
(Click on above thumbnails to enlarge photos)
SANSUI
DS-77 DS77
AUDIO / VIDEO SURROUND PROCESSOR
Sansui DS-77 selling for repair / restoration. Switches dirty, Attack and
Bass switches bad. Power amp produces only a very small amount of power.
Unit looks fine. No further info available.
As-Is
$35.
complete
SOLD 5/25/08 |
- |
SANSUI CASSETTE TAPE DECK PARTS AND PARTS UNITS:
|
|
- |
(Click on above thumbnails to enlarge photos)
SANSUI
SC-2000
CASSETTE DECK PARTS
- PARTING OUT -
Just had transport disassembled to replace rubber and never progressed.
Great cosmetic shape and motor runs well! Some
parts may also fit the Sansui SC-1000, 2000, 3000 and SC-5000 models.
Wood Case- $39.
(Cases,
covers and side plate / panels, etc. do not include mounting screws as
those are sold separately when available)
Face - $45.
Cassette Door Face- $19.
Knob Set - $29.
Motor / transport (disassembled) - $39.
Cosmetic Cond. 9
Complete AS-IS
$59.
|
- |
|
- |
- |
- |
Before calling,
PLEASE read the
text in orange below.
