CABLES FOR VINTAGE MICS!
(Click on above thumbnails to enlarge photo)
CABLES FOR VINTAGE MICS!
"RARE AS HENS' TEETH"
CUSTOM BUILT
W/ ORIGINAL NEW OLD STOCK
3-PIN
- MALE XLR
AMPHENOL
SCREW-ON CONNECTOR
MICROPHONE CABLES
MADE IN THE USA!
VINTAGE STYLE
MICROPHONE MIC CABLE CABLES FOR SALE
New vintage mic cables
for Shure mics using screw-on, 3-pin Amphenol type connectors. These are super-high quality cables with a
great 1 year warranty from manufacturer. They are well insulated and
shielded, with an Amphenol type 3-pin screw-on connector on one end, and
an all metal male XLR connector on the other for input to standard, modern
mixers with XLR inputs. To use with a guitar amp input, simply use an
adaptor!
They will fit Astatic 77, Shure 55S, 55C, 55B, older 55SH,
55SW, 51, 51S, 315,
530, 535, 556, Shure DY-11, DY-45G and most other Shure microphones, some EV
microphones such as the EV 630, EV-726 (may
require slight modification to
connector on cable)
Turner 22X, Turner U9S (no mod required), Stromberg-Carlson MD22A,
and others using a 3-pin, screw on Amphenol
type. ( not for modern XLR mics).
Please verify that your microphone is
working prior to ordering. If
you need assistance doing this please just phone us.
20' (feet) in length!
New!
$58.99 ea.
|
CABLES FOR VINTAGE MICS!
(Click on above thumbnails to enlarge photo)
CABLES FOR VINTAGE MICS!
"RARE AS HENS' TEETH"
CUSTOM BUILT
W/ ORIGINAL NEW OLD STOCK
4-PIN
- MALE XLR
AMPHENOL
SCREW-ON CONNECTOR
MICROPHONE CABLES
MADE IN THE USA!
VINTAGE STYLE
MICROPHONE MIC CABLE CABLES FOR SALE
New vintage mic cables for
many (not all) EV (Electro-Voice) mics using screw-on, 4-pin
Amphenol type connectors. These are super-high quality cable with a great 1
year warranty from manufacturer. They are well insulated and
shielded, with an Amphenol type 4-pin screw-on connector on one end, and an
all metal, male XLR connector on the other for input to standard, modern
mixers with XLR inputs. To use with a guitar amp input, simply use an
XLR-1/4" adaptor!
They will fit DuKane 7A160, EV /
Electrovoice 77A, EV-623,
EV 630, 636,
644, 664, 674, 676, EV-726, 767,
Rauland 1248, Stromberg-Carlson MD37CS and most other EV using a 4-pin, screw on Amphenol type.
These will also fit, with a slight modification to the plug, some Shure mics
such as the
Shure 545, 545S,
565 / Uni-Sphere. (not for modern XLR mics).
Please
verify that your mic is functioning prior to ordering cables. If
you need assistance doing this please just phone us.
20' (feet) in length!
NEW!
$58.99 ea.
|
CABLES FOR VINTAGE MICS!
(Click on above thumbnails to enlarge photo)
CABLES FOR VINTAGE MICS!
"RARE AS HENS' TEETH"
CUSTOM BUILT
W/ ORIGINAL NEW OLD STOCK
AMPHENOL
SCREW-ON
3-PIN
TO MALE 1/4" / 280 / PHONO / GUITAR PLUG
MICROPHONE CABLES
MADE IN THE USA!
VINTAGE STYLE
MICROPHONE MIC CABLE CABLES FOR SALE
New vintage mic cables
for shure microphones and other using screw-on, 3-pin Amphenol type
connectors. These
are super-high quality cable with a great 1 year warranty from
manufacturer. They are well insulated and shielded, with an
Amphenol type, 91-MC3M, 3-pin screw-on connector on one end, and an all metal Neutrik 1/4" male "guitar / phono" plug connector on the
other for input to standard guitar amps and mixers with 1/4" inputs.
They will fit Astatic 77, Shure 55S, 55C, 55B, older 55SH,
55SW, 51, 51S, 315,
530, 535, 556, Shure DY-11, DY-45G and most other Shure microphones, some EV
microphones such as the EV 630, EV-726 (may
require slight modification to
connector on cable)
Turner 22X, Turner U9S (no mod required), Stromberg-Carlson MD22A,
and others using a 3-pin, screw on Amphenol
type.
( not for modern XLR mics).
Please
verify that your mic is functioning prior to ordering cables. If
you need assistance doing this please just phone us.
20' (feet) in
length!
NEW!
$54.99 ea.
|
CABLES FOR VINTAGE MICS!
(Click on above thumbnails to enlarge photo)
CABLES FOR VINTAGE MICS!
"RARE AS HENS' TEETH"
CUSTOM BUILT
W/ ORIGINAL NEW OLD STOCK
AMPHENOL
SCREW-ON
4-PIN
TO MALE 1/4" / 280 / PHONO / GUITAR PLUG
MICROPHONE CABLES
MADE IN THE USA!
VINTAGE STYLE
MICROPHONE MIC CABLE CABLES FOR SALE
New vintage mic cables
for EV Electro-Voice microphones and other using screw-on, 4-pin Amphenol
type connectors. These are
super-high quality cable with a great 1 year warranty from manufacturer. They are well insulated and shielded, with an Amphenol
type, 91-MC4M, 4-pin screw-on connector on one end, and an all metal Neutrik
1/4" male "guitar / phono" plug connector on the other for
input to standard guitar amps and mixers with 1/4" inputs.
They will
fit
DuKane 7A160,
EV models
77A,
623,
636,
644, 664, 674, 676, 726, 767,
Rauland 1248, Stromberg-Carlson MD37CS and most other EV Electro-Voice
microphones and others using a 4-pin, screw on Amphenol type connector.
These will also fit, with a slight modification to the plug, some Shure
mics such as the
Shure 545, 545S,
565 / Uni-Sphere. (not for modern XLR mics).
(
not for modern XLR mics).
Please
verify that your mic is functioning prior to ordering cables. If
you need assistance doing this please just phone us.
20' (feet) in length!
NEW!
$54.99 ea.
|
|
CABLES FOR VINTAGE MICS!
(Click on above thumbnails to enlarge photo)
CABLE FOR VINTAGE MICS,
HARP MICS, AMPS AND LAPSTEELS!
"RARE AS HENS' TEETH"
CUSTOM MADE
CENTER PIN - MALE XLR A3M PLUG
MICROPHONE CABLE
2501F SCREW-ON TYPE
MICROPHONE PLUG
TO MALE XLR /
A3M PLUG
MADE IN THE USA!
VINTAGE STYLE
MICROPHONE MIC CABLE CABLES FOR SALE
New vintage mic cables
for many older mics using screw-on, center-pin Amphenol connectors
~5/8" in diameter. These are
super-high quality cable with a great 1 year warranty from manufacturer. They are well insulated and shielded, with an Amphenol
center-pin screw-on connector on one end, and an XLR male connector on the
other for input to standard modern mixers and snakes. To use
directly into a guitar amp simply use an adaptor, transformer, or direct
box.
They will fit any microphone, pick-up, or any device using a
center-pin, screw on Amphenol type including Astatic
JT-30, Turner S22D, 22X,
and Turner 33D, some Americans, Shure
535A, PE-585 PE585 and other
Shure "PE" series microphones EV 611 Mercury, EV 630, EV 638, EV Cardax 950, some
Altec Microphones, American Microphones, Calrad
DM-11, Clectro QA-150, and many, many
others. (not for modern XLR mics). Please verify that your mic or pickup
is functioning prior to ordering cables.
If you need assistance doing this
please just phone us.
20' (feet) in length!
NEW!
$32.99 ea.
|
CABLES FOR VINTAGE MICS!
(Click on above thumbnails to enlarge photo)
CABLE FOR VINTAGE MICS,
HARP MICS, AMPS AND LAPSTEELS!
"RARE AS HENS' TEETH"
MODEL - "F-TWENTY"
CENTER PIN -1/4" GUITAR / PHONO STYLE PLUG
MICROPHONE CABLE
2501F SCREW-ON TYPE
MICROPHONE PLUG
TO MALE 1/4" /
280 / PHONO / GUITAR PLUG
MADE IN THE USA!
VINTAGE STYLE
MICROPHONE MIC CABLE CABLES FOR SALE
New vintage mic cables
for many older mics using screw-on, center-pin Amphenol connectors
~5/8" in diameter. These are
super-high quality cable with a great 1 year warranty from manufacturer. They are well insulated and shielded, with an Amphenol
center-pin screw-on connector on one end, and an all metal Neutrik
1/4" male "guitar / phono" plug connector on the other for
input to standard, modern mixers and guitar amps with 1/4" inputs.
They will fit any microphone, pick-up, or any device using a center-pin,
screw on Amphenol type including Astatic JT-30, Turner
S22D, 22X,
and Turner 33D, some
Americans, Shure 535A, PE-585 PE585 and other Shure "PE"
series microphones EV 611 Mercury, EV 630, EV 638, EV Cardax 950, some
Altec Microphones, American Microphones, Calrad
DM-11, Clectro QA-150, and many, many others. ( not for
modern XLR mics).
Please
verify that your mic is functioning prior to ordering cables. If
you need assistance doing this please just phone us.
20' (feet) in length!
NEW!
$29.99 ea.
|
(Click on above thumbnails to enlarge photo)
NEW LISTING
SUPER QUALITY
25'
STANDARD 3-PIN
FEMALE XLR -
MALE XLR
LOW IMPEDANCE MIC CABLE
OUR PART # OTSJ-25
MADE IN THE USA!
&
WITH A LIFE-TIME WARRANTY*
MICROPHONE MIC CABLE CABLES FOR SALE
Cable for modern XLR mics such as Shure SM-57, SM-58, SM-48, SM-81, 55SH,
300, 315, 330, 333, EV N/D 257, 357, 457, 757, PL Series, EV DS35, 635,
RE-38, RE-10, RE-20, AKG C-3000,
C-1000, 414, D-190E, D-1000,
D-1200E and hundreds of other models. If your mic uses an XLR
then this cable will work. I have sold these cables for the past 14 years and only recently decided
to add them to the web site. These are not "Cheap" cables. I do
not use or sell "Cheap" cables. If your number one priority is
to save money, in the short run, then that's what you should do. Save your
money. If you want to buy a mic cable you can finally rely on show after
show, then THIS IS THE CABLE!!! I have sold literally thousands of these
and have only had maybe a dozen come back. They are fitted with the more
expensive Switchcraft brand plugs on both ends and are hand
made in the USA with a LIFETIME warranty!*
If it ever fails due to workmanship or parts failure, it will be
replaced with a new unit!*
Just send it back and we'll send you a new one. Your show is important.
Too important to trust to cheap, intermittent cables. I can't tell you how
many times I have seen a $30,000 sound system brought to it's knees by one
$3 cable.
NEW
$24.99 ea.
or
Get a 6-pack for $144.99
shipped**
or
Get a 12-pack for $229.99
shipped**
*
Warranted against defects in original workmanship, but not against
abnormal use / abuse, ie; cut cable, bent plug or cables eaten by dogs,
cats or other family members.
**Shipping
to lower 48 US states. Other locations calculated separately.
|
(Click on above thumbnails to enlarge photo)
NEW LISTING
REAL QUALITY
6" (inch)
FEMALE XLR - 1/4" MALE
LOW IMPEDANCE to HIGH Z
MIC ADAPTOR / TRANSFORMER / PIGTAIL
Finally we found an XLR-1/4" transformer / adaptor that doesn't
"gut" itself after you use it a half dozen times. I can't tell
you how many times I've used cheap versions of these in the past at gigs,
that totally come apart when you un-plug them. This one is built to last
and stay together.
This version is also the "pig-tail" one that doesn't turn your
microphone cable plug into an 8" lever like the "solid"
versions do. With the cheap way mixing boards / consoles, portable PA
systems and guitar amps are made these days, you need all the help you can
get. Any tension on the solid, "one-piece" versions will bend
your input jacks. This version puts no more tension on your input jacks
than a normal phono cable does.
Internal, built-in transformer converts Low Z (600 ohms) to Hi Z (50,000
ohms) to allow all your mic's sound into your pre-amp / amp. It's not just
an adaptor. Also has a switch to defeat the transformer if you wish to
just use it as an adaptor. It's essentially a Direct-Box in a cable. 1
year warranty against workmanship defects*.
NEW
$26.99 ea.
or
Get a 6-pack for $119.99
shipped**
*
Warranted against defects in original workmanship, but not against
abnormal use / abuse, ie; cut cable, bent plug or cables eaten by dogs,
cats or other family members.
**Shipping
to lower 48 US states. Other locations calculated separately.
|
(Click on above thumbnails to enlarge photo)
NEW ADDITION
SUPER QUALITY
20'
STANDARD 3-PIN
XLR-1/4" PHONO / 280 PLUG
HIGH IMPEDANCE MIC CABLE
OUR PART # OT-M-20
MADE IN THE USA!
&
WITH A LIFE-TIME WARRANTY*
MICROPHONE MIC CABLE CABLES FOR SALE
Cable for modern Shure XLR mics that are High-Impedance, such as Shure
PE series such as PE-505P & other models. I have sold these cables for the past 14 years and only recently decided
to add them to the web site. These are not "Cheap" cables. I do
not use or sell "Cheap" cables. If your number one priority is
to save money, in the short run, then that's what you should do. Save your
money. If you want to buy a mic cable you can finally rely on show after
show, then THIS IS THE CABLE!!! They are fitted with the more
expensive Neutrik brand plugs on both ends and are hand
made in the USA with a LIFETIME warranty!*
If it ever fails due to workmanship or parts failure, it will be
replaced with a new unit!*
Just send it back and we'll send you a new one. Your show is important.
Too important to trust to cheap, intermittent cables. I can't tell you how
many times I have seen a $30,000 sound system brought to it's knees by one
$3 cable. Again, these cables are for High-Impedance mics. (If
you have a normal Low-Impedance mic and wish to connect to a 1/4"
jack, then you should choose our OT-SJ-25 XLR-XLR cable with our
XLR-1/4" Transformer converter.)
NEW
$21.99 ea.
|
(Click on above thumbnails to enlarge photo)
NEW ADDITION
SUPER QUALITY
20'
STANDARD 3-PIN
XLR-1/4" PHONO / 280 PLUG
HIGH IMPEDANCE MIC CABLE
OUR PART # OT-V-20
MADE IN THE USA!
&
WITH A LIFE-TIME WARRANTY*
MICROPHONE MIC CABLE CABLES FOR SALE
Cable for modern EV Electro-Voice XLR mics that are High-Impedance. I have sold these cables for the past 14 years and only recently decided
to add them to the web site. These are not "Cheap" cables. I do
not use or sell "Cheap" cables. If your number one priority is
to save money, in the short run, then that's what you should do. Save your
money. If you want to buy a mic cable you can finally rely on show after
show, then THIS IS THE CABLE!!! They are fitted with the more
expensive Neutrik brand plugs on both ends and are hand
made in the USA with a LIFETIME warranty!*
If it ever fails due to workmanship or parts failure, it will be
replaced with a new unit!*
Just send it back and we'll send you a new one. Your show is important.
Too important to trust to cheap, intermittent cables. I can't tell you how
many times I have seen a $30,000 sound system brought to it's knees by one
$3 cable.
(If you have a normal Low-Impedance mic and wish to
connect to a 1/4" jack, then you should choose our OT-SJ-25 XLR-XLR
cable with our XLR-1/4" Transformer converter.)
NEW
$21.99 ea.
|
(Click on above thumbnails to enlarge photo)
CONNECTORS FOR VINTAGE MICS!
"RARE AS HENS' TEETH"
ORIGINAL NEW OLD STOCK
AMPHENOL
3-PIN
MICROPHONE CONNECTOR
MALE 91-MC3MOT
91MC3MOT
CABLE MOUNT MICROPHONE CONNECTORS
OUR PART # 91-MC3MOT
MADE IN THE USA!
VINTAGE STYLE
MICROPHONE MIC CONNECTORS FOR SALE
New "Amphenol" style 3-pin 91-MC3MOT
Microphone cable connectors.
They will fit Astatic 77, Shure 55S, 55C, 55B, older 55SH,
55SW, 51, 51S, 315,
530, 535, 556, Shure DY-11, DY-45G and most other Shure microphones, some EV
microphones such as the EV 630, EV-726 (may
require slight modification to
connector on cable)
Turner 22X, Turner U9S (no mod required), Stromberg-Carlson MD22A,
and others using a 3-pin, screw on Amphenol
type. ( not for modern XLR mics).
They are
available in
very limited quantities and when they're gone we don't know when we will
have access to more.
NEW
$38.99 ea.
|
(Click on above thumbnails to enlarge photo)
"RARE AS HENS' TEETH"
ORIGINAL NEW OLD STOCK
AMPHENOL
4-PIN MICROPHONE CONNECTOR
MALE 91-MC4MOT
91MC4MOT
CABLE MOUNT MICROPHONE CONNECTORS
OUR PART # 91-MC4MOT
MADE IN THE USA!
VINTAGE STYLE
MICROPHONE MIC CONNECTORS FOR SALE
New old stock Amphenol 4-pin 91-MC4MOT
Microphone cable connectors.
They will fit
DuKane 7A160,
EV models
77A,
623,
636,
644, 664, 674, 676, 726, 767,
Rauland 1248, Stromberg-Carlson MD37CS and most other EV Electro-Voice
microphones and others using a 4-pin, screw on Amphenol type connector. These will also
fit, with a slight modification to the plug, some Shure mics such as the
Shure 545, 545S,
565 / Uni-Sphere. (not for modern XLR mics).
(
not for modern XLR mics).
They are
available in
very limited quantities and when they're gone we don't know when we will
have access to more.
NEW
$38.99 ea.
|
(WRONG
PHOTO. CORRECT PHOTO COMING)
"EVEN RARER THAN HENS' TEETH"
ORIGINAL NEW OLD STOCK
AMPHENOL
3-PIN MALE 91-MC3M'ish???
CABLE MOUNT MICROPHONE CONNECTORS
OUR PART # OT3M-W/OC
(without
collar)
No, we don't know what these fit, so study the
photos and your mic or connector closely.
VINTAGE STYLE
MICROPHONE MIC CONNECTORS FOR SALE
New old stock Amphenol 3-pin MALE ??-??3? Microphone cable
connectors.
They are in limited quantities and when they're gone we don't
have a source more. We do not know what mics / connectors they will fit, so look VERY CLOSELY and STUDY the above
photos. They are not for standard Shure style mics such as the Shure 55,
51, 500, 315 etc.
(we do not have that
connector separately, only as a
complete cable), but they do use
the Shure Pin configuration of Pin-1 directly under the keyway. These are in
very limited quantities and when they're gone, they're gone.
NOS
$38.99 ea.
ONLY ABOUT A DOZEN LEFT IN STOCK
If
anyone has any info as to models these connectors fit or proper model
number feel free to let us know. Thanks.
|
(Click on above thumbnails to enlarge photo)
"EVEN RARER THAN HENS' TEETH"
ORIGINAL NEW OLD STOCK
AMPHENOL
4-PIN FEMALE 91-MC4F
CABLE MOUNT MICROPHONE CONNECTORS /
EV 664 REPLACEMENT INSERT CONNECTOR
OUR PART # OT4F-W/C
(with collar)
No, we don't know what these fit, so study the
photos and your mic or connector closely.
VINTAGE STYLE
MICROPHONE MIC CONNECTORS FOR SALE
New old stock Amphenol 4-pin 91-MC4F? microphone cable
connectors. They are in limited quantities and when they're gone we don't
have a source more. We do not know what mics or
connectors they will fit, so look VERY CLOSELY and STUDY the above photos.
(We have determined that they will fit Astatic DNHZ 's & D-104 's. They
may also fit others)
Just figured out that the inside, bakelite part of this will replace
your broken / busted / chipped internal connector on EV mics with 4-pins, such as the
EV 664!
We have actually repaired a few EV 664's with the insert from this
connector.
NEW
$38.99 ea.
IN STOCK
If anyone has any info as to
other models
these connectors fit or proper model number feel free to let us know.
Thanks.
These connectors
will
fit Astatic DNHZ 's & D-104 's microphones mics
|
(Click on above thumbnails to enlarge photo)
"EVEN RARER THAN HENS' TEETH"
ORIGINAL NEW OLD STOCK
AMPHENOL
3-PIN FEMALE 91-MC3F'ish???
CABLE MOUNT MICROPHONE CONNECTORS
OUR PART # OT3F-W/C
(with collar)
No, we don't know what these fit, so study the
photos and your mic or connector closely.
VINTAGE STYLE
MICROPHONE MIC CONNECTORS FOR SALE
New old stock Amphenol 3-pin FEMALE ??-??3? Microphone cable
connectors. They are in limited quantities and when they're gone we don't
have a source more. We
do not know what mics or connectors they will fit, so look VERY CLOSELY
and STUDY the above photos. They
are not for standard Shure style mics such as the Shure 55, 51, 500, 315
etc.
(we do not have that connector
separately, only as a
complete cable), but they do use the Shure Pin configuration
of Pin-1 directly under the key. These are in
very limited quantities and when they're gone, they're gone.
NOS
$38.99 ea.
ONLY A FEW
LEFT IN STOCK
If
anyone has any info as to models these connectors fit or proper model
number feel free to let us know. Thanks.
|
(Click on above thumbnails to enlarge photo)
"EVEN RARER THAN HENS' TEETH"
ORIGINAL NEW OLD STOCK
AMPHENOL
3-PIN FEMALE 91-MC3F'ish???
CABLE MOUNT MICROPHONE CONNECTORS
OUR PART # OT3F-W/OC
(without
collar)
These will couple with a
standard 91-MC3M connector. We don't know what else it will fit.
VINTAGE STYLE
MICROPHONE MIC CONNECTORS FOR SALE
New old stock Amphenol 3-pin FEMALE ??-??3? Microphone cable
connectors. There is very limited supply of this style connector. We
do not know what mics or connectors they will fit, so look VERY CLOSELY
and STUDY the above photos. They
are not for standard Shure style mics such as the Shure 55, 51, 500, 315
etc.
(we do not have that connector
separately, only as a
complete cable), but they do use the Shure Pin configuration
of Pin-1 directly under the key and will mate up with our standard 3-Pin
Shure / Amphenol 91-MC3M cable connectors. These are in
very limited quantities and when they're gone, they're gone.
NOS
$38.99 ea.
SOLD OUT
If anyone has any info as to
models these connectors fit or proper model number feel free to let us
know. Thanks.
New info; We have been informed that this connector
possibly fits the Astatic T-3 microphone.
|
